This is the True Spike antenna adapter that lets you use any True Spike lug nut cap as an antenna. If you want to use the same lug nut cap you have on your wheels on your antenna, so everything on your vehicle matches, this is the adapter you need. Lug nut caps are sold separately. Specifications: - Width: 20MM - length not counting threads: 28MM - Female threads: M6x1.0 - Male threads: M8x1.25...

More details ➞

         Very simple tool to remove stuck lug nut sleeves. There are very rare instances where a wheel is made with very small and deep lug nut holes. The holes will be big enough where you can push the lug nut sleeve into it and put your spikes on, but when it comes time to get the lug nuts out, the sleeves will be deep in the lug nut hole, where you cannot grab the top of them, and they will be very difficult to fish them out so you can get your socket in there to remove the actual lug nut. This simple tool solves that problem. It comes with double sided tape, and it just glues itself to the top of the sleeve so that you can pull it out to get your socket in to remove your lug nuts. ...

More details ➞

    NEW True Spike Shank Lug nuts for stock wheels that use shank lug nuts, and the Weld and Cragar Style wheels. The True Spike lug nuts are the new standard of the industry, CNC machined forged steel with a threaded end and rubber O-ring to be able to mount any of the True Spike billet aluminum lug nut caps. The O-ring will put pressure on the cap when tightened down so that your caps will not fall off.     These lug nuts are available in 2 shank lengths, 0.800 and 1.137, they use a 21MM socket to install and remove them. Lug nut sizing information: - Lug Nut Seat Style: Shank - Lug Nut Head Style: Standard - End Design: Closed end with threaded stud and rubber O-ring - Lug Nut Shank Length (in): 0.800 in. or 1.137 in. - Lug Nut Shank Diameter (in): 0.687 in. - Washer Included: Yes - Washer Shape: Round centered - Washer Outside Diameter (in): 1.070 in. - Lug Nut Material: Steel - Lug Nut Finish: Black - Wrench Size Required: 21MM - Quantity: Packaged in sets of 4....

More details ➞

          Want to add some bling and enhance the look of your aftermarket shackles, tow hooks, or recovery hooks? True Spike has the answer with the new True Spike Recovery Hook Shackle Pin Kit and it is just what you need! It includes a 3/4" diameter stainless steel pin, two C-clips, and two cool 51mm (2-inch) True Spike billet aluminum spikes.   Note: The assembled length of the pin and spikes is roughly 7 inches from tip to tip. Please make sure that your bumper has enough clearance before purchasing.                    Installation couldn't be easier —just insert the pin, clip it in place with the included C-clips, and screw on the spikes or bullets. Universal fitment, will work with any aftermarket brand recovery shackle or hook with a 3/4" diameter hole (Please measure your stock pin before purchasing).            We’ve test-fitted these on both Royal and Monster Hook brand shackles and hooks, and they fit without any issues. These two brands have a 1.10" opening.            This basic kit comes with 1 pin, 2 C-clips, and 2 spikes, which is enough for one shackle or hook. If you need them for 2 hooks, choose a pair from the dropdown. Features: -  Pin is made of T304SS Stainless Steel  -  3/4" Diameter -  Pin length: 3" or 78mm  -  2 C-Clips included  -  2 True Spike brand 51mm (2 inch) billet aluminum end spikes or bullets included per pin -  Spikes are either hard anodized, triple chrome plated, painted (white only), or 24K gold plated for a long lasting and durable finish  -  Easy Installation ...

More details ➞

           The T-Shirt is a soft, medium-weight shirt made with 100% ring-spun cotton. The short-sleeve shirt features the True Spike lug nut logo graphic on the left-front-top chest, and True Spike bomber style goddess of war nose art logo in the middle of the back, and the USA flag on the left sleeve. This is a unisex, regular fit t-shirt. Only available in black.             The Hoodie is a soft, heavy-weight hoodie made with 50% cotton and 50% polyester. The long-sleeve hoodie features the True Spike lug nut logo graphic on the left-front-top chest, and the True Spike bomber style goddess of war nose art logo in the middle of the back, and the USA flag on the left sleeve. This is a unisex, regular fit hoodie. Only available in black. Available in these sizes: Small Medium Large XL XXL XXXL...

More details ➞

          Want to add some bling and enhance the look of your aftermarket hitch? True Spike has the answer with the new True Spike Tow Hitch Pin Kit and it is just what you need! It includes a 5/8" diameter stainless steel pin, two C-clips, and two cool 51mm (2-inch) True Spike billet aluminum spikes or bullets.   Note: The assembled length of the pin and spikes is roughly 7 inches from tip to tip. Please make sure that your bumper has enough clearance before purchasing.                    Installation couldn't be easier —just insert the pin, clip it in place with the included C-clips, and screw on the spikes. Universal fitment, will work with any aftermarket brand toe hitch receiver a 5/8" diameter hole and a 3" width (Please measure your stock pin and hitch before purchasing).            This basic kit comes with 1 pin, 2 C-clips, and 2 spikes, which is enough for one shackle or hook. Universal Fitment: Fits any aftermarket hitch with a 5/8” (0.625”) hole and 3” width. (Check your hitch width before buying — these are made for 3” wide setups only.) Features:  -  Pin is made of T304SS Stainless Steel - strong enough to outlast your build -  5/8" Diameter -  Pin length: 3" or 78mm  -  2 C-Clips included  -  2 True Spike brand 51mm (2 inch) billet aluminum end spikes or bullets Included per pin -  Spikes are either hard anodized, triple chrome plated, painted (white only), or 24K gold plated for a long lasting and durable finish  -  Easy Installation ...

More details ➞

    The Patented (D781,691) True Spike Tuner lug nuts are the new standard of the industry, CNC machined forged steel with a threaded end and rubber o-ring to be able to mount any of the True Spike billet aluminum lug nut caps. The o-ring will put pressure on the cap when tightened down so that your caps will not fall off.     The tuner lug nuts are for the customers that have wheels that need to use the thin tuner lug nuts. These lug nuts are longer and thinner that the usual standard 39MM-41MM acorn lug nuts. These lug nuts are 51MM long. These use a regular 17MM socket to screw them on and off. If you have wheels that need tuner lug nuts then these are the lug nuts you need.     These lug nuts are only available in 51MM length, so they will fit both cars and trucks.  We have lug nut sleeve covers that are specific to these lug nuts. You can buy them here:   Tuner Lug Nut Sleeve Covers     US Patent: D781,691...

More details ➞

      VMS Racing Trust 15x8 4x100 with 20 offset wheel comes in a beautiful black milling finish.       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands. Features: - 15 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Street legal, VIA and JLL approved. - 73.1 MM center bore....

More details ➞

      These are the 20MM diameter 30MM length True Spike Tuner Style Machined Spiral Cuts lug nut caps. Made of the highest quality CNC machined T-6061 billet aluminum. These come in 2 finishes, black with red machined spiral cuts and black with machined silver cuts.       Will fit all the VMS Racing True Spike lug nuts.        You can buy the True Spike lug nuts on another part of the store and then buy the caps here to make a full set. True Spike lug nuts are available here:  https://www.vmsracing.com/collections/truespike-lug-nuts         Also remember the lug nut sleeve covers, available here: https://www.vmsracing.com/collections/lug-nut-sleeve-covers...

More details ➞

      These are the 20MM diameter 30MM length True Spike "Tuner Style" lug nut caps. Made of the highest quality CNC machined T-60361 billet aluminum. These come in all types of finishes, anodized, painted (white), 24K gold plated, neo chrome and triple chrome plated.        Will fit all the VMS Racing True Spike lug nuts.        You can buy the True Spike lug nuts on another part of the store and then buy the caps here to make a full set. True Spike lug nuts are available here:  https://www.vmsracing.com/collections/truespike-lug-nuts         Also remember the lug nut sleeve covers, available here: https://www.vmsracing.com/collections/lug-nut-sleeve-covers...

More details ➞

     BLACK Billet Aluminum VMS Racing Driving Turn Signal Light Guard/Covers for the 2007-2016 Jeep Wrangler JK including the 4 door Wrangler Unlimited.      Check out the new VMS Racing Billet Driving Light Guards for the 2007-2016 Jeep Wrangler JK Models, including the 4 door Unlimited. Do not confuse VMS Racing's Billet Aluminum Driving Light Guards with the cheap die-cast light surrounds sold all over eBay. These are CNC machined from a solid piece Billet Aluminum. After machining, they receive a super-durable Black Hard Anodized finish for years of good looks. Very simple to install with the supplied double-sided 3M tape. Features: • CNC machined from a solid piece of 6061-T6 billet aluminum. • Beautiful black Anodized finish. • Easy to install with the included 3M double sided tape. Just peel and stick. • Enhances the look of your Jeep while protecting the lights....

More details ➞

           TYPE R style 5 speed screw in shift knob, comes with locking nut. VMS Racing shift knobs are threaded to manufacturer standards for easy installation, no need for drilling or tapping. PLEASE LOOK AT THE BOTTOM OF OUR HOME PAGE FOR YOUR SHIFTER THREAD SIZE. Shift knob will ONLY work on manual transmission vehicles.VMS Racing shift knobs are manufactured of Aircraft Quality T-6061 Billet Aluminum, and then they are precision machined to exacting tolerances. After all the machining is done they are anodized to ensure a long lasting finish, and to provide years of trouble free service and looks.Features:• T-6061 billet aluminum. - Black and silver are matte anodized, blue and red is regular anodizing.• Direct bolt-on with no modifications required.• Black Chrome locking lug nut.• Easy to install....

More details ➞

           TYPE R style 5 speed screw in shift knob, comes with locking nut. VMS Racing shift knobs are threaded to manufacturer standards for easy installation, no need for drilling or tapping. PLEASE LOOK AT THE BOTTOM OF OUR HOME PAGE FOR YOUR SHIFTER THREAD SIZE. Shift knob will ONLY work on manual transmission vehicles.VMS Racing shift knobs are manufactured of Aircraft Quality T-6061 Billet Aluminum, and then they are precision machined to exacting tolerances. After all the machining is done they are anodized to ensure a long lasting finish, and to provide years of trouble free service and looks.Features:• T-6061 billet aluminum. - Black and silver are matte anodized, blue and red is regular anodizing.• Direct bolt-on with no modifications required.• Black Chrome locking lug nut.• Easy to install....

More details ➞

VMS TYPE R style 5 speed screw in shift knob in REAL CARBON FIBER. Come with lock nut. VMS Racing shift knobs are threaded to manufacturer standards for easy installation, no need for drilling or tapping. PLEASE LOOK AT THE BOTTOM OF OUR HOME PAGE FOR YOUR SHIFTER THREAD SIZE. Shift Knob is made to Work on Manual transmission vehicles ONLY.VMS Racing shift knobs are manufactured of Aircraft Quality T-6061 Billet Aluminum, and then they are precision machined to exacting tolerances. After all the machining is done, the shift knob is covered in hand laid REAL Carbon Fiber and everything is sealed under a UV resistant clear coat. After it is finished the clear coat is polished to high luster shine to ensure a long lasting finish, and to provide years of trouble free service and looks.Features:• Real hand laid Carbon Fiber, beautiful clear coat with UV protection.• Direct bolt-on with no modifications required.• Black Chrome locking lug nut.• Easy to install....

More details ➞

VMS TYPE R style 6 speed screw in shift knob in REAL CARBON FIBER. Come with lock nut. VMS Racing shift knobs are threaded to manufacturer standards for easy installation, no need for drilling or tapping. PLEASE LOOK AT THE BOTTOM OF OUR HOME PAGE FOR YOUR SHIFTER THREAD SIZE. Shift Knob is made to Work on Manual transmission vehicles ONLY.VMS Racing shift knobs are manufactured of Aircraft Quality T-6061 Billet Aluminum, and then they are precision machined to exacting tolerances. After all the machining is done, the shift knob is covered in hand laid REAL Carbon Fiber and everything is sealed under a UV resistant clear coat. After it is finished the clear coat is polished to high luster shine to ensure a long lasting finish, and to provide years of trouble free service and looks.Features:• Real hand laid Carbon Fiber, beautiful clear coat with UV protection.• Direct bolt-on with no modifications required.• Black Chrome locking lug nut.• Easy to install....

More details ➞

This is the VMS Racing version of the JDM (Japan Spec) Honda Civic Type-R Crank Pulley, which is a special design pulley that was used in the JDM Type-R that were for track use. The original JDM Crank Pulley has a slight under drive and is of lighter mass because it eliminates the A/C pulley.THIS NEW VMS RACING VERSION GOES ONE STEP FURTHER BY PUTTING LIGHTENING HOLES IN ITS PULLEY TO MAKE IT EVEN LIGHTER THAN THE OEM TYPE-R PULLEY!!This pulley will provide even quicker response of the engine than the OEM Type-R pulley will because of its lower weight! It fits Honda B16, B18 and B20 DOHC VTEC Engines (except B20A). Please Note: This pulley will disable your A/C and might require a shorter belt depending on the application... It weighs just 9.8 ounces! NEW VMS RACING LIGHT WEIGHT UNDERDRIVE Type-R Single Belt CRANKSHAFT PULLEY!! JUST ARRIVED NEW DESIGN!!! Nicest looking and performing pulley anywhere at any price!!! This is a new, in the factory sealed box, never used or installed, VMS Racing underdrive light weight crankshaft pulley. Unique and exclusive gun metal matte finish.This is a lightweight 6061-T6 billet aluminum CNC machined crankshaft pulley with tolerances kept down to .001, which are usually reserved for aircraft and military designs. This pulley has better than OEM belt fitment and alignment. Real world gains in horsepower, torque and fuel economy....

More details ➞

TRIPLE CHROME PLATED Vms Racing 2.5" inch crossover X-Pipe made of the highest quality T-409 Stainless Steel. The VMS Racing X-Pipe are ideal for dual/dual or single dual exhaust systems. It is a drastic improvement for exhaust systems that have no balance pipe and a significant improvement over a systems with an H-pipe. Theses X-Pipes promote better exhaust gas scavenging, a better balance between individual cylinder banks, and a significant noise reduction over systems with no balance pipe, or the regular H-pipes. There will be significant increases in horsepower, and especially mid range torque, with the Vms Racing X-Pipe. These X-pipes are made of the highest quality T-409 stainless steel and will outlast your vehicle. Highest quality X-pipe at an incredible price! Fits the following vehicles:• Universal fit, will work on most cars or trucks with dual exhaust. CUTTING AND WELDING IS REQUIRED FOR MOST VEHICLES.Measurements:• Length: 12" inches.• Outlet: Dual 2 1/2" inches.• Inlet: Dual 2 1/2" inches.• Center core: 2 1/2" X 4" inches.Features:• TRIPLE CHROME PLATED T409 Stainless Steel.• Increased Horsepower.• Increased mid-range torque.• Lower noise levels.• Heavy gauge Stainless Steel.• Highest quality X-pipe at an incredible price!...

More details ➞

RAW Stainless Vms Racing 2.5" inch crossover X-Pipe made of the highest quality T-409 Stainless Steel. The VMS Racing X-Pipe are ideal for dual/dual or single dual exhaust systems. It is a drastic improvement for exhaust systems that have no balance pipe and a significant improvement over a systems with an H-pipe. Theses X-Pipes promote better exhaust gas scavenging, a better balance between individual cylinder banks, and a significant noise reduction over systems with no balance pipe, or the regular H-pipes. There will be significant increases in horsepower, and especially mid range torque, with the Vms Racing X-Pipe. These X-pipes are made of the highest quality T-409 stainless steel and will outlast your vehicle. Highest quality X-pipe at an incredible price! Fits the following vehicles:• Universal fit, will work on most cars or trucks with dual exhaust. CUTTING AND WELDING IS REQUIRED FOR MOST VEHICLES.Measurements:• Length: 12" inches.• Outlet: Dual 2 1/2" inches.• Inlet: Dual 2 1/2" inches.• Center core: 2 1/2" X 4" inches.Features:• RAW T409 Stainless Steel.• Increased Horsepower.• Increased mid-range torque.• Lower noise levels.• Heavy gauge Stainless Steel.• Highest quality X-pipe at an incredible price!...

More details ➞

TRIPLE CHROME PLATED Vms Racing 3" inch crossover X-Pipe made of the highest quality T-409 Stainless Steel. The VMS Racing X-Pipe are ideal for dual/dual or single dual exhaust systems. It is a drastic improvement for exhaust systems that have no balance pipe and a significant improvement over a systems with an H-pipe. Theses X-Pipes promote better exhaust gas scavenging, a better balance between individual cylinder banks, and a significant noise reduction over systems with no balance pipe, or the regular H-pipes. There will be significant increases in horsepower, and especially mid range torque, with the Vms Racing X-Pipe. These X-pipes are made of the highest quality T-409 stainless steel and will outlast your vehicle. Highest quality X-pipe at an incredible price! Fits the following vehicles:• Universal fit, will work on most cars or trucks with dual exhaust. CUTTING AND WELDING IS REQUIRED FOR MOST VEHICLES.Measurements:• Length: 12" inches.• Outlet: Dual 3" inches.• Inlet: Dual 3" inches.• Center core: 3" X 4" inches.Features:• TRIPLE CHROME PLATED T409 Stainless Steel.• Increased Horsepower.• Increased mid-range torque.• Lower noise levels.• Heavy gauge Stainless Steel.• Highest quality X-pipe at an incredible price!...

More details ➞

RAW Stainless Vms Racing 3.0" inch crossover X-Pipe made of the highest quality T-409 Stainless Steel. The VMS Racing X-Pipe are ideal for dual/dual or single dual exhaust systems. It is a drastic improvement for exhaust systems that have no balance pipe and a significant improvement over a systems with an H-pipe. Theses X-Pipes promote better exhaust gas scavenging, a better balance between individual cylinder banks, and a significant noise reduction over systems with no balance pipe, or the regular H-pipes. There will be significant increases in horsepower, and especially mid range torque, with the Vms Racing X-Pipe. These X-pipes are made of the highest quality T-409 stainless steel and will outlast your vehicle. Highest quality X-pipe at an incredible price! Fits the following vehicles:• Universal fit, will work on most cars or trucks with dual exhaust. CUTTING AND WELDING IS REQUIRED FOR MOST VEHICLES. Measurements:• Length: 12" inches.• Outlet: Dual 3" inches.• Inlet: Dual 3" inches.• Center core: 3" X 4" inches.Features:• RAW T409 Stainless Steel.• Increased Horsepower.• Increased mid-range torque.• Lower noise levels.• Heavy gauge Stainless Steel.• Highest quality X-pipe at an incredible price!...

More details ➞

                NEW!! PATENTED True Spike by VMS Racing billet aluminum bullet valve stem caps are available in many finishes. These will fits most OEM and aftermarket wheels found In cars, trucks, SUV's, ATV's, trailers, motorcycles etc... with standard valve stem caps. FITS RUBBER VALVE STEMS AND SOME TPMS SENSORS. LOOK AT SECOND PHOTO ON AD. - Sold in packs of 4.  - Fits rubber valve stem caps TR413 and TR415. - Made of CNC machined T6061 billet aluminum. - Available in the following finishes: anodized, triple chrome plated, neo chrome plated and 24K gold plated for a long lasting finish. - Easy to install.  Patent number: 10,675,929  ...

More details ➞

ONE PAIR OF VMS RACING DUMMY HOOD PIN KIT. THIS KIT IS MADE FROM HIGH QUALITY CNC MACHINED BILLET ALUMINUM AND IS THEN ANODIZED FOR HIGH QUALITY FINISH AND DURABILITY. THIS KIT IS STICK ON KIT USING 3M AUTOMOTIVE DOUBLE SIDED TAPE. JUST CLEAN THE SURFACE,  PEEL OFF THE BACKING AND STICK ON THE DESIRED SURFACE. NO DRILLING REQUIRED. FEATURES: - CLASSIC MUSCLE CAR LOOK- CNC MACHINED BILLET ALUMINUM - ANODIZED OR TRIPLE CHROME PLATED - JUST PEEL AND STICK WITH 3M BONDING TAPE - UNIVERSAL- LANYARD IS APPROXIMATELY 12 INCHES LONG (51MM) - UNIVERSAL- 60MM DIAMETER- AVAILABLE IN ANODIZED BLACK OR GUN METAL, AND TRIPLE CHROME PLATED FINISH....

More details ➞

   The VMS Racing Ground Wire Kit centralizes the grounding point of your vehicles electrical system. This causes less fluctuation for the electrical system and responsiveness of the engine end electrical components resulting from proper grounding. A must-have for any vehicle with engine swaps since grounding tends to be an issue with these types of performance modifications.       FEATURES:  - Copper center hub. - 12 gauge low resistance wires wrapped in silicone....

More details ➞

VMS Racing high-performance, universal front-mount intercoolers. VMS Racing has a superior quality intercooler that is just right for your application. VMS Racing front-mount intercoolers are constructed of T6061 aluminum with precision TIG welding. Our universal intercoolers will provide the ideal cooling capacity for any turbo application, while safely increasing horsepower while minimizing boost loss. Please look at our store for accessories such as: silicone hose couplers, aluminum piping, T-Bolt clamps and more! - Bar-and-plate core provides superior heat transfer while effectively reducing AIT's.- Extremely strong one-piece cast aluminum end tanks withstand high boost pressures.- Constructed with T6061 aluminum and precision TIG welded.  ...

More details ➞

VMS Racing high-performance, universal front-mount intercoolers. VMS Racing has a superior quality intercooler that is just right for your application. VMS Racing front-mount intercoolers are constructed of T6061 aluminum with precision TIG welding. Our universal intercoolers will provide the ideal cooling capacity for any turbo application, while safely increasing horsepower while minimizing boost loss. Please look at our store for accessories such as: silicone hose couplers, aluminum piping, T-Bolt clamps and more! - Bar-and-plate core provides superior heat transfer while effectively reducing AIT's.- Extremely strong one-piece cast aluminum end tanks withstand high boost pressures.- Constructed with T6061 aluminum and precision TIG welded.  ...

More details ➞

VMS Racing high-performance, universal front-mount intercoolers. VMS Racing has a superior quality intercooler that is just right for your application. VMS Racing front-mount intercoolers are constructed of T6061 aluminum with precision TIG welding. Our universal intercoolers will provide the ideal cooling capacity for any turbo application, while safely increasing horsepower while minimizing boost loss. Please look at our store for accessories such as: silicone hose couplers, aluminum piping, T-Bolt clamps and more! - Bar-and-plate core provides superior heat transfer while effectively reducing AIT's.- Extremely strong one-piece cast aluminum end tanks withstand high boost pressures.- Constructed with T6061 aluminum and precision TIG welded.  ...

More details ➞

VMS Racing high-performance, universal front-mount intercoolers. VMS Racing has a superior quality intercooler that is just right for your application. VMS Racing front-mount intercoolers are constructed of T6061 aluminum with precision TIG welding. Our universal intercoolers will provide the ideal cooling capacity for any turbo application, while safely increasing horsepower while minimizing boost loss. Please look at our store for accessories such as: silicone hose couplers, aluminum piping, T-Bolt clamps and more! - Bar-and-plate core provides superior heat transfer while effectively reducing AIT's.- Extremely strong one-piece cast aluminum end tanks withstand high boost pressures.- Constructed with T6061 aluminum and precision TIG welded.  ...

More details ➞

VMS Racing high-performance, universal front-mount intercoolers. VMS Racing has a superior quality intercooler that is just right for your application. VMS Racing front-mount intercoolers are constructed of T6061 aluminum with precision TIG welding. Our universal intercoolers will provide the ideal cooling capacity for any turbo application, while safely increasing horsepower while minimizing boost loss. Please look at our store for accessories such as: silicone hose couplers, aluminum piping, T-Bolt clamps and more! - Bar-and-plate core provides superior heat transfer while effectively reducing AIT's.- Extremely strong one-piece cast aluminum end tanks withstand high boost pressures.- Constructed with T6061 aluminum and precision TIG welded.  ...

More details ➞

VMS Racing high-performance, universal front-mount intercoolers. VMS Racing has a superior quality intercooler that is just right for your application. VMS Racing front-mount intercoolers are constructed of T6061 aluminum with precision TIG welding. Our universal intercoolers will provide the ideal cooling capacity for any turbo application, while safely increasing horsepower while minimizing boost loss. Please look at our store for accessories such as: silicone hose couplers, aluminum piping, T-Bolt clamps and more! - Bar-and-plate core provides superior heat transfer while effectively reducing AIT's.- Extremely strong one-piece cast aluminum end tanks withstand high boost pressures.- Constructed with T6061 aluminum and precision TIG welded.  ...

More details ➞

VMS Racing high-performance, universal front-mount intercoolers. VMS Racing has a superior quality intercooler that is just right for your application. VMS Racing front-mount intercoolers are constructed of T6061 aluminum with precision TIG welding. Our universal intercoolers will provide the ideal cooling capacity for any turbo application, while safely increasing horsepower while minimizing boost loss. Please look at our store for accessories such as: silicone hose couplers, aluminum piping, T-Bolt clamps and more! - Bar-and-plate core provides superior heat transfer while effectively reducing AIT's.- Extremely strong one-piece cast aluminum end tanks withstand high boost pressures.- Constructed with T6061 aluminum and precision TIG welded.  ...

More details ➞

The VMS Racing Thin Quick Release features all aluminum components with a ball bearing structured release. This quick release is designed to integrate with most well known hub adapters on the market and will accept most popular aftermarket steering wheels with a standard MOMO/Nardi 6 bolt hub. The VMS Racing Thin Quick Release kit utilizes a pin and gear locking mechanism for maximum durability, with no play, while reducing the required space. This is perfect for those who feel the need to put their steering wheels further away from them, or for those who want to use a crush-type hub. The VMS Racing quick release hub is designed for street and racing applications. It allows the user to remove and replace the factory steering wheel and replace it with an aftermarket steering wheel. The aftermarket steering wheel can be detached from the hub quickly, to deter theft, and allow quick entry and exit to the vehicle. The VMS quick release hubs features a variety of colors and finishes for individualized styling of any vehicle. These also feature a safety push pin to prevent premature unlocking. Made from the highest quality T6061 billet aluminum for maximum durability and usability....

More details ➞

                      NEW!! PATENTED True Spike by VMS Racing billet aluminum spike valve stem caps are available in many finishes. These will fits most OEM and aftermarket wheels found In cars, trucks, SUV's, ATV's, trailers, motorcycles etc... with standard rubber valve stem caps. FITS RUBBER VALVE STEMS AND SOME TPMS SENSORS. LOOK AT SECOND PHOTO ON AD - Sold in packs of 4.  - Fits rubber valve stem caps TR413 and TR415. - Made of CNC machined T6061 billet aluminum. - Available in the following finishes: anodized, triple chrome plated, neo chrome plated and 24K gold plated for a long lasting finish. - Easy to install.  Patent number: 10,675,929  ...

More details ➞

            VMS Racing universal stick on antenna base with wiring. Made of OEM quality ABS plastic, this universal antenna stick on base will let you mount any of our antennas on your roof. Antenna base has an adjustable angle and comes with 3M automotive tape.   VMS Racing antenna features: - OEM quality ABS plastic. - Universal fit. - Easy to install, just peel and stick. - Lets you mount any VMS antenna on your roof. - M6x1MM thread.    ...

More details ➞

              NEW!! PATENDED True Spike by VMS Racing billet aluminum knurled valve stem caps FITS VEHICLES WITH OEM STEEL TPMS SENSORS. Available in many finishes. These will fits most OEM and aftermarket wheels found In cars, trucks, SUV's, ATV's, trailers, motorcycles etc... with OEM TPMS sensors.                       WILL FIT ALMOST ANY VALVE STEM RUBBER OR STEEL! - Sold in packs of 4.  - Fits most vehicles with the OEM steel TPMS (tire pressure monitoring system) valve stems or rubber valve stems. - Made of CNC machined T6061 billet aluminum. - Available in the following finishes: anodized, triple chrome plated, neo chrome plated and 24K gold plated for a long lasting finish. - Easy to install. - Length: 42MM - Width: 18MM  Patent number: 10,675,929  ...

More details ➞

                   NEW!! PATENTED True Spike by VMS Racing billet aluminum spike valve stem caps FITS VEHICLES WITH OEM STEEL TPMS SENSORS. Available in many finishes. These will fits most OEM and aftermarket wheels found In cars, trucks, SUV's, ATV's, trailers, motorcycles etc... with OEM TPMS sensors.                        WILL FIT ALMOST ANY VALVE STEM RUBBER OR STEEL! - Sold in packs of 4.  - Fits most vehicles with the OEM steel TPMS (tire pressure monitoring system) valve stems or rubber valve stems. - Made of CNC machined T6061 billet aluminum. - Available in the following finishes: anodized, triple chrome plated, neo chrome plated and 24K gold plated for a long lasting finish. - Easy to install. - Length: 42MM - Width: 18MM  Patent number: 10,675,929  ...

More details ➞

          VMS RACING UNIVERSAL TURBINO HIGH FLOW 9MM or 12MM AIR FILTER BREATHER. THE BREATHERS TOP IS CONSTRUCTED FROM ABS PLASTIC AND THE BOTTOM FROM ALUMINUM, THE CENTER IS 100% COTTON GAUZE SANDWICHED BETWEEN A DOUBLE STAINLESS STEEL MESH. THESE BREATHERS CAN BE USED ON INTAKE PIPES, VALVE COVERS, CATCH CANS OR ANYWHERE A 9MM or 12MM BREATHER IS REQUIRED. ONE STAINLESS STEEL CLAMP IS INCLUDED.         COOLEST LOOKING AIR BREATHER ANYWHERE. AND ORIGINAL VMS DESIGN! FEATURES: - HIGH FLOW COTTON GAUZE - 9MM INLET - UNIVERSAL - STAINLESS STEEL CLAMP INCLUDED - AVAILABLE IN RED OR BLUE. - OUTSIDE DIAMETER: 2.90". - OVERALL HEIGHT: 2.60" ....

More details ➞

          VMS RACING UNIVERSAL HIGH FLOW 9MM AIR FILTER BREATHER. THE BREATHERS TOP IS CONSTRUCTED FROM ALUMINUM, THE CENTER IS AND 100% COTTON GAUZE SANDWICHED BETWEEN A DOUBLE STAINLESS STEEL MESH. THESE BREATHERS CAN BE USED ON INTAKE PIPES, VALVE COVERS, CATCH CANS OR ANYWHERE A 9MM BREATHER IS REQUIRED. ONE STAINLESS STEEL CLAMP IS INCLUDED. FEATURES: - HIGH FLOW COTTON GAUZE - 9MM INLET - UNIVERSAL - STAINLESS STEEL CLAMP INCLUDED - AVAILABLE IN RED OR BLUE....

More details ➞

VMS Racing CNC Machined billet aluminum vacuum manifold kit. This is a really good quality piece, this is not your average made in china "el cheapo" vacuum block that you see over the place. The quality and finish is much better, that is why we have the high resolution photos so you can see that the quality and finish is well above the rest. This is a great addition for enthusiasts and tuners that require additional vacuum sources. Each vacuum manifold is CNC machined from a block of T6061 solid aluminum and features six functional vacuum ports and two inlet and outlets Also comes with a full complement of block off plugs. This is an ideal and easy method to tie in a boost controller and gauges, or any other components that require a separate vacuum source.The VMS Racing block can also be used for fuel and oil. If you have a traditional hot rod with 2, 3, 4, or even 6 Carburetors, you can use the VMS block to supply fuel to each individual carburetor.• ALL VMS Racing vacuum blocks use a Type II bright dip anodized finish for great looks and corrosion protection. Measurements: - Length: 5 1/2" inches - Width: 1 3/4" inches - Thickness: 15/16" inches and 1 1/2" at the mounting points. - Center to center of bolt holes: 4 1/2" inches...

More details ➞

...

More details ➞

Shopping for someone else but not sure what to give them?Give them the gift of choice with a VMS Racing/True Spike E-Gift Card. Available in amounts from $10 to $500. E-Gift Cards are delivered by email and contain instructions to redeem them at checkout. Our gift cards have no additional processing fees. E-Gift Cards are not available for purchase with Sezzle. If you’d like to purchase other items with Sezzle, please make a separate purchase for E-Gift card(s)....

More details ➞

            VMS Racing coil-on-plug adapter conversion plate allows easy adaptation of individual K-series coils onto a B-series VTEC valve cover. This will not work on non-VTEC valve covers.         If you are looking to convert your VTEC B-series engine's distributor ignition system to a 'coil on plug' distributorless ignition system, mounting the coil packs used be a challenge. The VMS Racing adapter plate allows you to easily install individual Honda/Acura K-series coil packs to the top of your B-series valve cover.  Features: - CNC Machined Billet Aluminum - Beautiful anodized matte finish - Mounts 4 individual coils - Fits B-Series VTEC engines only (B16A and B18C) - Easy to install Coils: You can use our UF311 coils available here: UF311 COILS...

More details ➞

                                            COIL INFORMATION PART # IC8207:            VMS Blaster Style Compact Ignition Coil – E-Core Design            The VMS Blaster Style Compact Coil features an efficient E-core design, known for delivering high voltage and strong spark energy. Built for performance and durability, the coil windings are securely housed in a Dupont™ Rynite® injection-molded shell, then encased in epoxy for superior protection against dust, vibration, and moisture.             Designed with a compact footprint, this coil easily fits into tight engine bays. It includes vibration-isolating mounting hardware, making it ideal for both street applications and track use.            Despite its size, this coil delivers impressive performance—perfect for upgrading weak factory distributor coils. Key Features: Stronger and more efficient than most factory internal coils Delivers full ignition system voltage directly to the spark plugs Rigid, durable housing with a tall tower and brass primary terminals Peak Current: 300 mA Spark Duration: 220 µs Maximum Voltage: 40,000 V Turns Ratio: 70:1                                 COIL BRACKET INFORMATION PART # ICB001:                       The VMS Blaster SS Coil Bracket offers a secure solution for mounting your VMS Blaster-Style Coil or MSD 8207 Blaster SS Coil.  Made from 1/4-inch thick 6061 billet aluminum, each bracket is CNC machined for a perfect fit and superior strength. A black anodized finish provides long-lasting durability and corrosion resistance, ensuring your coil setup looks sharp and performs reliably. Key Features: Compatible with VMS Blaster Style and MSD 8207 Blaster SS Coils CNC-machined from 6061 billet aluminum (1/4 in. thick) Black anodized finish for corrosion protection Includes complete mounting hardware Designed and engineered in the USA ...

More details ➞

VMS Racing 96-01 Acura Integra GSR OBD2 POLISHED High Performance Distributor with a VMS high output coil and rotor and comes with a standard black cap (not pictured). These VMS distributors are suitable for use on Honda/Acura engines are designed for performance from the inside out, starting with a precision machined mirror polished aluminum housing. Inside these new housings are ball bearing guides for high-rpm stability. The best available Hall Effect pickup assemblies are used to improve trigger signals and are also compatible with the factory ECU. This distributor comes with a VMS Racing internal high performance ignition coil that creates a much higher energy spark. This inductive spark  has longer spark duration voltage for increased performance. This increased spark output improves combustion, resulting in improved performance through the entire rpm range. This exact same distributor has been used successfully on 400+ RWHP Honda/Acura series engines with complete reliability. COIL SPECIFICATIONS: • Turns Ratio 56:1 • Primary Resistance .70 ohms • Secondary Resistance 3.7K ohms • Inductance 4.2 mH • Spark duration (mS) 1100 uS • Peak Current 140 mA...

More details ➞

    New Billet Aluminum Thermostat Housing Plug and bracket for the K20 and K24 engines.      Are you tired and frustrated of having to deal with the ugly K20/K24 pipe and heater hose after you have done your K20/K24 engine swap? Well VMS Racing comes back again to the rescue with the new VMS Racing Billet Aluminum Thermostat Housing plug and bracket!      The VMS Racing Billet Aluminum Thermostat Housing and bracket will allow you to remove the factory heater core hose pipe and hose. No more ugly pipes or hoses! Whenever you K engine swap you need a VMS Racing Thermostat Housing Plug and Bracket!     The VMS Racing Thermostat Housing is CAD designed and precision CNC machined from a solid piece of aircraft grade T6061 Aluminum. It is then anodized using a unique hard anodizing process for a long lasting finish and lifetime durability. Comes with a Vitton O-ring for lifetime of trouble free use. Fits the following vehicles: - 2002-2006 Acura RSX - 2004-2008 Acura TSX - 2006-present Honda Civic Si - 2002-2005 Honda Civic Si...

More details ➞

This is the coolest looking (this thing looks awesome!) VMS Racing Rally WITH Flaming Mustang shift knob (flaming mustang is on both sides) ROUND BALL style 6 speed screw in shift knob for the 2015-2017 Ford Mustangs with the recess for the reverse lockout. Will also fit the Ford Focus and Fiesta that are equipped with the reverse lockout shifter. VMS Racing shift knobs are threaded to manufacturer standards for easy installation, no need for drilling or tapping. Installation will require a small amount of Loctite to secure the shift knob to the shifter. It is highly recommended that you use a Loctite adhesive that is NOT permanent so that the shift knob will not be damaged if you need to remove it in the future. *** WILL NOT FIT THE 2015-2017 MUSTANG SHELBY GT350 as they have a different thread on them! *** VMS Racing shift knobs are manufactured of Aircraft Quality T-6061 Billet Aluminum, and then they are precision machined to exacting tolerances. After all the machining is done, the shift knob is finished using the latest in water transfer printing technology. After it is finished the clear coat is applied and polished to a high luster shine to ensure a long lasting finish, and to provide years of trouble free service and looks. The color and lettering will not rub off or loose it shine. Look at the photos, finish looks like porcelain! Features: • Billet Aluminum with water transfer technology, beautiful clear coated with UV protection. • Direct bolt-on with no modifications required. • Weighs 6 ounces and measures 2 inches in diameter. • Look at the photos, best quality available. • Easy to install....

More details ➞

           The T-Shirt is a soft, medium-weight shirt made with 100% ring-spun cotton. The short-sleeve shirt features the VMS Racing logo graphic on the front-top chest, an assortment of VMS Racing wheels graphics and logo in the middle of the back, and the USA flag on the left sleeve. This is a unisex, regular fit t-shirt. Only available in black.             The Hoodie is a soft, heavy-weight hoodie made with 50% cotton and 50% polyester. The long-sleeve hoodie features the VMS Racing logo graphic on the front-top chest, an assortment of VMS Racing wheels graphics and logo in the middle of the back, and the USA flag on the left sleeve. This is a unisex, regular fit hoodie. Only available in black. Available in these sizes: Small Medium Large XL XXL XXXL...

More details ➞

            Universal intake pipe or turbo COMPOSITE (Delrin material) velocity stack that will fit 3" inch (76MM) diameter air inlet turbos or intake pipes.              The VMS Racing air suction funnel, AKA turbo velocity stack is king for both turbo & normally aspirated engines. It 'cleans' the turbulent air entering a turbo or normally aspirated engine for dramatic airflow improvements. Made of a UNIQUE AND EXCLUSIVE composite material called DELRIN. And then finished in a red color. It Has a 3.00" / 76mm inlet (turbo side or intake pipe side) with an extra large 6" inch wide bell mouth inlet. Works with just about any turbocharger or intake pipe utilizing a 3.00" air inlet. Also fits smaller turbos and intake piping with 2.50" & 2.75" air inlet when used with 3" silicone transition coupler (Not Included).              This Velocity Stack is made of DELRIN COMPOSITE material making it superior to any other composite velocity stacks on the market today. DELRIN has a much higher temperature resistance, strength, stiffness, hardness, dimensional stability, toughness, fatigue resistance, solvent and fuel resistance, abrasion resistance, low wear and low friction than regular ABS Plastic. Look at the pictures and see the materials and then compare apples to apples before you buy. Features: - Made of thick composite Delrin Material. - Dramatic airflow improvements. - Will fit basically any turbocharger of intake pipe with a 3" (76MM) diameter. - 6 inch outside diameter. - 2 1/2" tall. - 3" inlet. - Best Velocity stack on the market....

More details ➞

7 piece set of VMS Racing vortex generators (also available in Carbon Fiber look, please look at our other ads). This is the REAL DEAL. These micro-vortex generators actually produce miniature, controlled tornadoes, called "vortices". Without the production of "vortices" a vortex generator can not work! These micro-vortex generators actually sweep away uncontrolled airflow separation over your vehicles rear end with the benefit of reduced drag. These are not the fins you see on allover the place being sold as vortex generators. These are real vortex generators that actually work! These micro-vortex generators were designed by a former NASA aerodynamicist who worked on the NASA Micro-Vortex generator program in the 80's and 90's. NASA stopped this program years ago but this former NASA engineer, who is an avid pilot, keep doing his own research and improved on what NASA has developed years ago. What you see here is the latest development of the micro-vortex generator. NASA definition of what a micro-vortex generator is: Small, trapezoid-shaped, fin-like devices placed on the flaps of aircraft wings are increasing performance, reducing noise and saving fuel. Taken from: http://www.nasa.gov/centers/langley/news/factsheets/Micro-VG.html So by NASA definition the fins being sold on eBay can not be vortex generator as they are not trapezoid-shaped, and by consequence can not create effective "vortices". Please look at the pictures. The yellow Z06 Corvette installed these vortex generators to run at the Texas Mile and broke its previous speed record! Smart owner installed the vortex generators and thus far we have had good feedback from him, seems highway gas mileage has increased by a noticeable amount. Yes these things not only look good but actually work. Measurements:- Length: 4 3/4"- Width: 3 1/4"- Height: 1 1/4" Fits the following applications:- Universal fit, will work on virtually any car or truck. Features:- Only REAL vortex generators, designed by a former NASA aerodynamicist- Decreases aerodynamic drag- Decreases turbulence at the back of the vehicle- Decreases rear end air flow separation- Increases top speed of vehicle- Increases the gas mileage- Increases down force- Easily installed with the pre-applied 3M automotive grade tape, just peel and stick!- Best performing vortex generator on the market- Made of the highest quality automotive grade UV resistant ABS plastic- Can be painted to match any color...

More details ➞