This is the coolest looking (this thing looks awesome!) VMS Racing Rally WITH Flaming Mustang shift knob (flaming mustang is on both sides) ROUND BALL style 6 speed screw in shift knob for the 2015-2017 Ford Mustangs with the recess for the reverse lockout. Will also fit the Ford Focus and Fiesta that are equipped with the reverse lockout shifter. VMS Racing shift knobs are threaded to manufacturer standards for easy installation, no need for drilling or tapping. Installation will require a small amount of Loctite to secure the shift knob to the shifter. It is highly recommended that you use a Loctite adhesive that is NOT permanent so that the shift knob will not be damaged if you need to remove it in the future. *** WILL NOT FIT THE 2015-2017 MUSTANG SHELBY GT350 as they have a different thread on them! *** VMS Racing shift knobs are manufactured of Aircraft Quality T-6061 Billet Aluminum, and then they are precision machined to exacting tolerances. After all the machining is done, the shift knob is finished using the latest in water transfer printing technology. After it is finished the clear coat is applied and polished to a high luster shine to ensure a long lasting finish, and to provide years of trouble free service and looks. The color and lettering will not rub off or loose it shine. Look at the photos, finish looks like porcelain! Features: • Billet Aluminum with water transfer technology, beautiful clear coated with UV protection. • Direct bolt-on with no modifications required. • Weighs 6 ounces and measures 2 inches in diameter. • Look at the photos, best quality available. • Easy to install....

More details ➞

           The T-Shirt is a soft, medium-weight shirt made with 100% ring-spun cotton. The short-sleeve shirt features the VMS Racing logo graphic on the front-top chest, an assortment of VMS Racing wheels graphics and logo in the middle of the back, and the USA flag on the left sleeve. This is a unisex, regular fit t-shirt. Only available in black.             The Hoodie is a soft, heavy-weight hoodie made with 50% cotton and 50% polyester. The long-sleeve hoodie features the VMS Racing logo graphic on the front-top chest, an assortment of VMS Racing wheels graphics and logo in the middle of the back, and the USA flag on the left sleeve. This is a unisex, regular fit hoodie. Only available in black. Available in these sizes: Small Medium Large XL XXL XXXL...

More details ➞

            Universal intake pipe or turbo COMPOSITE (Delrin material) velocity stack that will fit 3" inch (76MM) diameter air inlet turbos or intake pipes.              The VMS Racing air suction funnel, AKA turbo velocity stack is king for both turbo & normally aspirated engines. It 'cleans' the turbulent air entering a turbo or normally aspirated engine for dramatic airflow improvements. Made of a UNIQUE AND EXCLUSIVE composite material called DELRIN. And then finished in a red color. It Has a 3.00" / 76mm inlet (turbo side or intake pipe side) with an extra large 6" inch wide bell mouth inlet. Works with just about any turbocharger or intake pipe utilizing a 3.00" air inlet. Also fits smaller turbos and intake piping with 2.50" & 2.75" air inlet when used with 3" silicone transition coupler (Not Included).              This Velocity Stack is made of DELRIN COMPOSITE material making it superior to any other composite velocity stacks on the market today. DELRIN has a much higher temperature resistance, strength, stiffness, hardness, dimensional stability, toughness, fatigue resistance, solvent and fuel resistance, abrasion resistance, low wear and low friction than regular ABS Plastic. Look at the pictures and see the materials and then compare apples to apples before you buy. Features: - Made of thick composite Delrin Material. - Dramatic airflow improvements. - Will fit basically any turbocharger of intake pipe with a 3" (76MM) diameter. - 6 inch outside diameter. - 2 1/2" tall. - 3" inlet. - Best Velocity stack on the market....

More details ➞

7 piece set of VMS Racing vortex generators (also available in Carbon Fiber look, please look at our other ads). This is the REAL DEAL. These micro-vortex generators actually produce miniature, controlled tornadoes, called "vortices". Without the production of "vortices" a vortex generator can not work! These micro-vortex generators actually sweep away uncontrolled airflow separation over your vehicles rear end with the benefit of reduced drag. These are not the fins you see on allover the place being sold as vortex generators. These are real vortex generators that actually work! These micro-vortex generators were designed by a former NASA aerodynamicist who worked on the NASA Micro-Vortex generator program in the 80's and 90's. NASA stopped this program years ago but this former NASA engineer, who is an avid pilot, keep doing his own research and improved on what NASA has developed years ago. What you see here is the latest development of the micro-vortex generator. NASA definition of what a micro-vortex generator is: Small, trapezoid-shaped, fin-like devices placed on the flaps of aircraft wings are increasing performance, reducing noise and saving fuel. Taken from: http://www.nasa.gov/centers/langley/news/factsheets/Micro-VG.html So by NASA definition the fins being sold on eBay can not be vortex generator as they are not trapezoid-shaped, and by consequence can not create effective "vortices". Please look at the pictures. The yellow Z06 Corvette installed these vortex generators to run at the Texas Mile and broke its previous speed record! Smart owner installed the vortex generators and thus far we have had good feedback from him, seems highway gas mileage has increased by a noticeable amount. Yes these things not only look good but actually work. Measurements:- Length: 4 3/4"- Width: 3 1/4"- Height: 1 1/4" Fits the following applications:- Universal fit, will work on virtually any car or truck. Features:- Only REAL vortex generators, designed by a former NASA aerodynamicist- Decreases aerodynamic drag- Decreases turbulence at the back of the vehicle- Decreases rear end air flow separation- Increases top speed of vehicle- Increases the gas mileage- Increases down force- Easily installed with the pre-applied 3M automotive grade tape, just peel and stick!- Best performing vortex generator on the market- Made of the highest quality automotive grade UV resistant ABS plastic- Can be painted to match any color...

More details ➞

7 piece set of VMS Racing vortex generators (also available in Carbon Fiber look, please look at our other ads). This is the REAL DEAL. These micro-vortex generators actually produce miniature, controlled tornadoes, called "vortices". Without the production of "vortices" a vortex generator can not work! These micro-vortex generators actually sweep away uncontrolled airflow separation over your vehicles rear end with the benefit of reduced drag.These are not the fins you see on allover the place being sold as vortex generators. These are real vortex generators that actually work! These micro-vortex generators were designed by a former NASA aerodynamicist who worked on the NASA Micro-Vortex generator program in the 80's and 90's. NASA stopped this program years ago but this former NASA engineer, who is an avid pilot, keep doing his own research and improved on what NASA has developed years ago. What you see here is the latest development of the micro-vortex generator.NASA definition of what a micro-vortex generator is: Small, trapezoid-shaped, fin-like devices placed on the flaps of aircraft wings are increasing performance, reducing noise and saving fuel. Taken from: http://www.nasa.gov/centers/langley/news/factsheets/Micro-VG.html So by NASA definition the fins being sold on eBay can not be vortex generator as they are not trapezoid-shaped, and by consequence can not create effective "vortices".Please look at the pictures. The yellow Z06 Corvette installed these vortex generators to run at the Texas Mile and broke its previous speed record! Smart owner installed the vortex generators and thus far we have had good feedback from him, seems highway gas mileage has increased by a noticeable amount. Yes these things not only look good but actually work.Measurements:- Length: 4 3/4"- Width: 3 1/4"- Height: 1 1/4"Fits the following applications:- Universal fit, will work on virtually any car or truck.Features:- Only REAL vortex generators, designed by a former NASA aerodynamicist- Decreases aerodynamic drag- Decreases turbulence at the back of the vehicle- Decreases rear end air flow separation- Increases top speed of vehicle- Increases the gas mileage- Increases down force- Easily installed with the pre-applied 3M automotive grade tape, just peel and stick!- Best performing vortex generator on the market- Made of the highest quality automotive grade UV resistant ABS plastic- Can be painted to match any color...

More details ➞

VMS Racing 10PC Vortex Generator Kit .The New VMS Racing Vortex Generators where designed to Increase vehicle Aerodynamic Performance , Reduce Drag and Improve Fuel Economy. Each Kit comes with 10 Vortex Generators and 3M double sided tape already pre cut to the same exact shape of the vortex generators for easy peel and stick installation.VMS Racing Vortex Generators Features : Improves Fuel Economy Increased Downforce and Reduces Drag Increase Top Speed and Performance Made of High Quality Abs Plastic Easy Installation No Modifications or Trimming Can be Painted to Match your Vehicle Color Kit Includes 10 Vortex Generators and 10 Pre cut 3M double sided tape for easy installation...

More details ➞

VMS Racing 10PC Vortex Generator Kit .The New VMS Racing Vortex Generators where designed to Increase vehicle Aerodynamic Performance , Reduce Drag and Improve Fuel Economy. Each Kit comes with 10 Vortex Generators and 3M double sided tape already pre cut to the same exact shape of the vortex generators for easy peel and stick installation.VMS Racing Vortex Generators Features : Improves Fuel Economy Increased Downforce and Reduces Drag Increase Top Speed and Performance Made of High Quality Abs Plastic Easy Installation No Modifications or Trimming Can be Painted to Match your Vehicle Color Kit Includes 10 Vortex Generators and 10 Pre cut 3M double sided tape for easy installation...

More details ➞

          Check out the new VMS Racing BILLET ALUMINUM HFCM Drain Plug. Comes with 2 high Quality Vitton-O-rings.           Are you having trouble draining your fuel water separator on your 2003-2007 6.0L Ford Super Duty truck? You are not alone and in fact, many technicians and owners that perform their own maintenance report that the 6 millimeter hex plug frequently strips out due to the soft metal that they are made from. Unfortunately once this happens most attempts to remove it fail. If you are having this problem VMS Racing comes back again to the rescue with their new Billet Aluminum Drain plug that will never strip, corrode or fail in any way. It is easy installed and removed with a regular wrench.        The VMS billet aluminum drain plug will eliminate forever the need to replace the weak, strip prone factory plug. It comes with a 2 high quality Vitton- O-ring that will last a lifetime. Now you have one less thing to worry about! Features: • CNC machined from T6061 billet aluminum. • Hard anodized for good looks and corrosion resistance. • Eliminates the need to be buying factory plugs and the cover when you can not get them out. • Easy to install. Fits the following vehicles: • 2003-2007 Ford Super Duty Trucks with the 6.0L Powerstroke Turbo Diesel engine.    ...

More details ➞

              VMS Racing billet wire separators. Best quality billet separators money can buy. CNC Machined from a solid piece of T6061 billet aluminum. These come with Stainless Steel Allen head bolts, for the ultimate in corrosion resistance and good looks. Hard anodized in many different colors to match your style.         Available in a pack of three pieces with one 4 hole and two 2 hole pieces, or a two pack with 2 three hole pieces.     ...

More details ➞