VMS Racing OEM coilover spanner wrench set for the C8 Corvette to be able to adjust the ride height on your C8 Z51/Z06, and the rear of your Front Lift Option E60 (with GPS front lift) Corvette (FOR FRONT LIFT E60 OPTION CORVETTE LOWERING KIT CLICK HERE). The VMS Racing spanner wrench is a precision machined tool specifically designed for use on the C8 Corvette, it is not a universal tool with a nice logo on it that kind of fits your coilovers.          This tool has FIVE major advantages from the universal tools that are being sold by most others:           First, It contacts the aluminum spring seat and the locking collar on two teeth instead of only one, which virtually eliminates slipping and the possibility of the tool damaging the teeth on the spring seats or the locking collars as the pressure is divided amongst two teeth.           Second, the tool is made out of aluminum which will not gall and damage the aluminum on your coilovers, like steel or stainless steel wrenches will on the spring seat or locking collar.             Third, since this tool was specifically made for the C8 the keyways on the wrenches are a precise fit to the keyways on the aluminum spring seat and locking collars, again making it even more unlikely that they will slip and you will gall or damage your shocks.           Fourth, and most importantly it comes with a cutout with a steel dowel pin on the back of the smaller wrench so that you can hold the coilover body in place with the smaller wrench while you turn your spring seat with the larger wrench. The factory threaded coilover body has holes on bottom of it specifically for this purpose. Without the cutout and the dowel pin on the smaller wrench the coilover will rotate on you while you try and adjust the height. It is very difficult to adjust the spring seat without this tool as the coilover body rotates as you try and spin the upper seat. Many a C8 owner has damaged their coilovers by using a universal wrench set and then having to use a pair of channel locks on the coilover threads to stop the coilover body from spinning, effectively damaging their shocks.         Fifth, the smaller spanner wrench has a 3 inch scale in 1/8 inch increments so that you can precisely measure how much you are lowering the car.  Features: Machined from 6061 T-6 billet aluminum You can lower your car up to an inch keyway with steel dowel pin to stop the coilover collar from spinning while making adjustments Designed in the USA Red anodized with the VMS laser logo Scale on smaller wrench to precisely measure your height adjustment Works on Z51, Z06, and on the rear of Corvettes with the Front Lift Option E60 (with GPS front lift)   ...

More details ➞

       VMS Racing front lowering kit for the C8 Corvette WITH the Front Lift Option E60 (with GPS front lift). The VMS Racing lowering kit is a simple replacement of the stock front lift actuator seat, and is designed to lower the front of your C8 Corvette either 0.75 or 0.50 inches. If you do not use the 0.25 spacer, then you get a 0.75 inch drop, and if you use the spacer you get a 0.50 inch drop. The spacer is a great tool to fine tune your ride height, especially if you plan to lower your car even further than 0.75 inches with the addition of lowering springs. This kit will allow you to drop your car .075 inches, just like the factory Z51 cars that do not have the front lift option. In the rear you can lower the car with the factory adjustable collars, you will need a coilover wrench set. Click on the red link below for the C8 coilover wrench set.       This kit also comes with a de-pin tool so that you can easily de-pin the shock connector on the mag ride cars.         For spanner wrenches to lower the rear of your E60 optioned car click here. Features: Machined from 6061 T-6 billet aluminum Lowers you front end 0.75 or 0.50 inches Comes with the Mag Ride de-pin tool for the shock connector Designed in the USA Red anodized with the VMS laser logo Retains full functionality of your front lift option, your car will still rise up. No trimming is needed of your bump stops as GM designed the Z51 cars to be able to be lowered .75 inches (maximum factory allowed). The bump stops on all C8's are the same, so no trimming is required   ...

More details ➞

             350MM (13.75") diameter VMS Racing Ultra-Lightweight Competition Aluminum Steering wheels. These steering wheels will work with basically any six, five, or three bolt hubs. You can add buttons to any of these wheels with our Dual Button Bracket Kit, link at bottom of page. YOU WILL NEED A HUB TO INSTALL THESE STEERING WHEELS TO YOUR VEHICLE, IT IS NOT INCLUDED.              We have a ton of accessories for these steering wheels. We have dual button brackets, the buttons themselves, decorative bolt washer combos in many colors to attach the steering wheel to the hub, we have 5 and 6 bolt horn rings so you can add a horn to your steering wheel, horn delete plates, and a vegan suede steering wheel cover. Please look at the bottom of this ad for links to all the steering wheel accessories.               These wheel are made of light weight, cross drilled, machined aluminum, and feature a 6061 center section. We have four different models to choose from: • Apex: - Flat wheel - Square holes on the spokes. - Only available in black. • Fury: - Flat wheel. - Circular holes on the spokes. - Only available in black. • Gladiator: - Concave wheel. - Available in 5 colors: black, blue, gun metal, red, and silver. - Comes with 2 standard button mounting holes. BUTTONS SOLD SEPARATELY, NOT INCLUDED. • Prodigy: - Flat wheel - Triangle holes on spokes. - Only available in black.  ALL steering wheels features the following: • 350MM (13.75") diameter.• 6061 aluminum center.• Lightweight machined and cross drilled aluminum outer ring.• Matte anodized finish.• Will work with basically any three, five, or six bolt hubs. ACCESSORIES: - Click here for the Dual Push button bracket kit - Click here for the 6, 5, or 3 Bolt Hub Bolt and Washer Kit - Click here for Horn Adapter Ring Kit for 5 and 6 bolt hubs - Click here for our Suede Steering Wheel Cover - Click here for the Horn Delete Plate kit  ...

More details ➞

      VMS Racing Phone Dial Street/Drag Race Drag Pack for the 1979-1993 Fox Body Mustangs THAT HAVE BEEN CONVERTEED TO THE FORD 5X114.3 (5X4.5") bolt pattern. You get two 15x10" 5X114.3 +20MM offset (6.3" of backspacing) wheels, and two 15x3.5" 5X114.3 -13 offset (1.75" backspacing) wheels. These wheels are available in black or silver milling.      These wheels are for use with the stock Ford center caps that came on the OEM 10 hole 15" Mustang wheels that were made between 1985-1989. They do come with small center caps for you to be able to use them while you get the OEM Ford Center caps.       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands. Fitment: - 1979-1993 Fox Body Mustangs that have been converted to the Ford 5x114.3 (5x4.5") bolt pattern. Rear wheels:          15x10" with 6.3" backspacing. Minor mods may be necessary, such as removing the quad shocks. This wheel was made with a 6.3" BS as opposed to the common 6.5" BS to help the Fox Body guys. Usually a 6.5" wheel with a 275-50/R15 tire will touch the inner wheel wells which will need to be pounded in. Most people will put a 1/4" spacer so the tire does not hit the fender. We basically changed the BS so you do not need to use a spacer, you may still need to do very minimal pounding on the wheel well depending on the specific tire. Smaller tires than a 275 make fitting much easier.            This 15x10 rear wheels may not fit on some cars with rear disc brakes. Check for brake clearance by measuring from the center of the axle to the top of the caliper. This measurement cannot exceed 6-1/2"  [6.52"] or the caliper will come in contact with the drop center of the wheel. Front Wheels:       15x3.5" with 1.75" backspacing. This wheel has a special center cap, that is wider and longer than our regular center caps. This center cap will clear the OEM spindle and rotor on the Fox Body Mustangs. This wheel was specially made for the Fox Body Mustangs.   Rear Wheel Features: - 18 pounds each. - Cast aluminum. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved.  Front Wheel Features: - 12 pounds each. - Cast aluminum. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1 MM - Street legal: VIA and JLL approved....

More details ➞

      VMS Racing Phone Dial Street/Drag Race Drag Pack for the 1979-1993 Fox Body Mustangs with the OEM 4 lug 4x108 bolt pattern. You get two 15x10" 4x108 +20MM offset (6.3" of backspacing) wheels, and two 15x3.5" 4x108 -13 offset (1.75" backspacing) wheels. These wheels are available in black or silver milling.      These wheels are for use with the stock Ford center caps that came on the OEM 10 hole 15" Mustang wheels that were made between 1985-1989. They do come with small center caps for you to be able to use them while you get the OEM Ford Center caps.       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands. Fitment: - 1979-1993 Fox Body Mustangs with the OEM 4x108 bolt pattern. Rear wheels:          15x10" with 6.3" backspacing. Minor mods may be necessary, such as removing the quad shocks. This wheel was made with a 6.3" BS as opposed to the common 6.5" BS to help the Fox Body guys. Usually a 6.5" wheel with a 275-50/R15 tire will touch the inner wheel wells which will need to be pounded in. Most people will put a 1/4" spacer so the tire does not hit the fender. We basically changed the BS so you do not need to use a spacer, you may still need to do very minimal pounding on the wheel well depending on the specific tire. Smaller tires than a 275 make fitting much easier.            This 15x10 rear wheels may not fit on some cars with rear disc brakes. Check for brake clearance by measuring from the center of the axle to the top of the caliper. This measurement cannot exceed 6-1/2"  [6.52"] or the caliper will come in contact with the drop center of the wheel. Front Wheels:       15x3.5" with 1.75" backspacing. This wheel has a special center cap, that is wider and longer than our regular center caps. This center cap will clear the OEM spindle and rotor on the Fox Body Mustangs. This wheel was specially made for the Fox Body Mustangs.   Rear Wheel Features: - 18 pounds each. - Cast aluminum. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved.  Front Wheel Features: - 12 pounds each. - Cast aluminum. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1 MM - Street legal: VIA and JLL approved....

More details ➞

      VMS Racing 10 Hole Phone Dial wheel in 15x10" 4x108 20mm offset (6.3" of backspacing). This wheel is currently available in either black or silver.        These wheels are for use with the stock Ford center caps that came on the OEM 10 hole 15" Mustang wheels that were made between 1985-1989. They do come with small center caps for you to be able to use them while you get the OEM Ford Center caps.       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands.        These wheels may not fit on cars cars with disc brakes. Check for brake clearance by measuring from the center of the axle to the top of the caliper. This measurement cannot exceed 6-1/2"  [6.52"] or the caliper will come in contact with the drop center of the wheel. Fitment: - 1979-1993 Fox Body Mustang 15x10 with 6.3" backspacing. Minor mods may be necessary, such as removing the quad shocks. This wheel was made with a 6.3" BS as opposed to a 6.5" BS to help the Fox Body guys. Usually a 6.5" wheel with a 275-50/R15 tire will touch the inner wheel wells which will need to be pounded in. Most people will put a 1/4" spacer so the tire does not hit the fender. We basically changed the BS so you do not need to use a spacer, you may still need to do very minimal pounding on the wheel well depending on the specific tire. Smaller tires than a 275 make fitting much easier.   Features: - 18 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved....

More details ➞

      VMS Racing 10 Hole Phone Dial wheel in 15x10" 5X114.3 (5X4.5") 20mm offset (6.3" of backspacing). This wheel if for the Fox Body Mustang that has been converted to the Ford 5x114.3 (5x4.5") bolt pattern. This wheel is currently available in either black or silver.        These wheels are for use with the stock Ford center caps that came on the OEM 10 hole 15" Mustang wheels that were made between 1985-1989. They do come with small center caps for you to be able to use them while you get the OEM Ford Center caps.       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands.        These wheels may not fit on cars cars with disc brakes. Check for brake clearance by measuring from the center of the axle to the top of the caliper. This measurement cannot exceed 6-1/2"  [6.52"] or the caliper will come in contact with the drop center of the wheel. Fitment: - 1979-1993 Fox Body Mustang 15x10 with 6.3" backspacing. Minor mods may be necessary, such as removing the quad shocks. This wheel was made with a 6.3" BS as opposed to a 6.5" BS to help the Fox Body guys. Usually a 6.5" wheel with a 275-50/R15 tire will touch the inner wheel wells which will need to be pounded in. Most people will put a 1/4" spacer so the tire does not hit the fender. We basically changed the BS so you do not need to use a spacer, you may still need to do very minimal pounding on the wheel well depending on the specific tire. Smaller tires than a 275 make fitting much easier.   Features: - 18 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved....

More details ➞

      VMS Racing 10 Hole Phone Dial 15x3.5" 4x108 -13 offset (1.75" backspacing) wheel is currently available in black or silver.        These wheels are for use with the stock Ford center caps that came on the OEM 10 hole 15" Mustang wheels that were made between 1985-1989. They do come with small center caps for you to be able to use them while you get the OEM Ford Center caps.       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands. Fitment: - 1979-1993 Fox Body Mustangs. This wheel has a special center cap, that is wider and longer, that will clear the OEM spindle and rotor on the Fox Body Mustangs. This wheel was specially made for the Fox Body Mustangs.  - Other vehicles that use a 4x108 bolt pattern.    Features: - 12 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1 MM - Street legal: VIA and JLL approved....

More details ➞

      VMS Racing 10 Hole Phone Dial 15x3.5" 5x114.3 (5x4.5") -13 offset (1.75" backspacing) wheel is currently available in black or silver.        These wheels are for use with the stock Ford center caps that came on the OEM 10 hole 15" Mustang wheels that were made between 1985-1989. They do come with small center caps for you to be able to use them while you get the OEM Ford Center caps.       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands. Fitment: - 1979-1993 Fox Body Mustangs. This wheel has a special center cap, that is wider and longer, that will clear the OEM spindle and rotor on the Fox Body Mustangs. This wheel was specially made for the Fox Body Mustangs.  - Other vehicles that use a 5x114.3 (5x4.5") bolt pattern.    Features: - 12 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1 MM - Street legal: VIA and JLL approved....

More details ➞

          VMS Racing Street/Drag Race Drag Pack wheel set. There are 2 front and 2 rear Black Hawk 17x10 (30 offset) & 18x5" 5X115 (-30 offset) wheels which are currently only available in black milling. Front 18x5 wheel information:          This wheel was designed specifically for the Hellcat narrow body cars to clear the OEM 6 piston Brembo front brakes. Will work on any 2006-2020 Charger or Challenger including the widebody cars, WILL NOT FIT 2021-2023 HELLCATS WHICH HAVE BIGGER BRAKES. Rear 17x10 wheel information:         This wheel was designed specifically for the Hellcat narrow body cars. Will work on any Charger or Challenger including the widebody cars. YOU WILL NEED SHORTHER SWAY BAR LINKS TO MOUNT THESE 17X10 WHEELS. On widebody cars the offset is not correct and the wheel will be 1" inboard.             OUR ADJUSTABLE SWAY BAR END LINK ARE HERE (CLICK HERE)       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands.                      Features 17x10 wheels: - 22 pounds each. - Cast aluminum. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JWL approved. Features 18x5 wheels: - 20 pounds each. - Cast aluminum. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JWL approved....

More details ➞

          VMS Racing Street/Drag Race Drag Pack wheel set. There are 2 front and 2 rear Modulo 17x10 (30 offset) & 18x5" 5X115 (-30 offset) wheels which are currently only available in black milling. Front 18x5 wheel information:          This wheel was designed specifically for the Hellcat narrow body cars to clear the OEM 6 piston Brembo front brakes. Will work on any 2006-2020 Charger or Challenger including the widebody cars, WILL NOT FIT 2021-2023 HELLCATS WHICH HAVE BIGGER BRAKES. Rear 17x10 wheel information:         This wheel was designed specifically for the Hellcat narrow body cars. Will work on any Charger or Challenger including the widebody cars. YOU WILL NEED SHORTHER SWAY BAR LINKS TO MOUNT THESE 17X10 WHEELS. On widebody cars the offset is not correct and the wheel will be 1" inboard.             OUR ADJUSTABLE SWAY BAR END LINK ARE HERE (CLICK HERE)       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands.                      Features 17x10 wheels: - 22 pounds each. - Cast aluminum. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JWL approved. Features 18x5 wheels: - 20 pounds each. - Cast aluminum. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JWL approved....

More details ➞

          VMS Racing BEADLOCK Drag Race Drag Pack, two front and two rear V-Star 17x10 SINGLE BEADLOCK (+54 offset/7.6" backspacing) & 18x5" 5X114.3 (-12 offset) wheels are currently available only in black milling.  Front 18x5 wheel information:          This wheel was designed specifically for the S550 Mustangs to clear front brakes including the GT with the performance package Brembo brakes (will not fit the GT350 or the S197 or S550 GT500). This wheel will fit the S197 and S650 Mustangs but ONLY with the standard GT brakes, it will not fit with either the 4 or 6 piston Brembo brake packages. Rear 17x10 wheel information:       This SINGLE BEADLOCK wheel will fit the S197, S550, and S650 Mustangs EXCEPT the GT350, GT500, and the S650 PP or Darkhorse with no issue.        VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands.           WILL NOT FIT THE S550 GT350/GT500 MUSTANG or S197 GT500! Features: - 18x5: 20 pounds each. - 17x10: 25 pounds each. - Cast aluminum. - Complete set of four wheels. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM ...

More details ➞

     VMS Racing SINGLE BEADLOCK Drag Race Drag Pack, two front and two rear, V-Star wheels in 17x10" 5X120 with 44 offset (7.25" backspacing) and the 18x5 -25 offset wheel is currently available only in black milling. These wheels fit great on the GEN 5 and 6 Camaro, the 2008-2009 Pontiac G8 GT, the 2014-2017 Chevy SS, and 2008-2014 Cadillac CTS-V. The 18x5 front wheels fit great on the GEN 5 and 6 Camaro, the 2008-2009 Pontiac G8 GT, the 2014-2017 Chevy SS, and 2008-2014 Cadillac CTS-V.                                FITMENT 17x10 SINGLE BEADLOCK REAR WHEEL:      We have verified the fit of this wheel on the Gen 5 and 6 Camaro SS (including 1LE) and V6 (2010 Camaro may need a thin wheel spacer), the Gen 5 Camaro ZL1 (may need a thin wheel spacer), the 2008-2009 Pontiac G8 GT (Fit NOT verified on the GXP model with Brembo brakes), the 2014-2019 Chevy SS (fit was verified on car with the Brembo brakes), the 2008-2014 Cadillac CTS-V, and the 2006-2013 Corvette Z06 and Grand Sport. We have not verified the fit on the Gen 6 ZL1, or Z28 cars, they may fit them, but we have not yet had access to these vehicles to verify the fit.                                                                                      FITMENT 18x5 FRONT RUNNERS:      This wheel will fit the Gen 5 and Gen 6 Camaro SS ( including the 1LE), the Camaro V6, the Gen 5 and 6 Camaro ZL1, the 2008-2009 Pontiac G8 GT (fit NOT verified on the GXP model with the Brembo brakes), the 2014-2017 Chevy SS (fit was verified on a car with the Brembo brakes), the 2008-2014 Cadillac CTS-V, and the 2006-2013 Corvette Z06 and Grand Sport (will not fit ZR1). We have NOT verified the fit of this wheel on the Gen 5 Camaro ZL1, or the Z28. This wheel may or may not fit the above mentioned models. As we get more cars here to check fitment we will update this information.      VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands.              Features 17x10 wheels: - 25 pounds each. - Cast aluminum. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM Features 18x5 wheels: - 20 pounds each. - Cast aluminum. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved....

More details ➞

          VMS Racing SINGLE BEADLOCK Drag Race Drag Pack wheel set. There are two front and two rear beadlock V-Star 17x10 (30 offset/6.75" backspacing) & 18x5" 5X115 (-30 offset) wheels which are currently available only in black milling. Front 18x5 wheel information:          This wheel was designed specifically for the Hellcat narrow body cars to clear the OEM 6 piston Brembo front brakes. Will work on any 2006-2020 Charger or Challenger including the widebody cars, WILL NOT FIT 2021-2023 HELLCATS WHICH HAVE BIGGER BRAKES. Rear 17x10 beadlock wheel information:         This wheel was designed specifically for the Hellcat narrow body cars. Will work on any Charger or Challenger including the widebody cars. YOU WILL NEED SHORTHER SWAY BAR LINKS TO MOUNT THESE 17X10 WHEELS. On widebody cars the offset is not correct and the wheel will be 1" inboard.             OUR ADJUSTABLE SWAY BAR END LINK ARE HERE (CLICK HERE)       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands.                      Features: - 18x5: 20 pounds each. - 17x10: 25 pounds each. - Cast aluminum. - Complete set of four wheels. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM ...

More details ➞

       VMS Racing SINGLE BEADLOCK Drag Race V-Star 17x10" 5X114.3 with 54 offset wheel is currently available only in black milling. This wheel fits great on the S197 and S550 Mustangs. We also have a 18x5 front wheel also specifically made for the S550 Mustangs to clear the performance package Brembo front brakes. Will fit the S650 with the standard brakes, will not fit with the Performance Package Brembo Brakes.       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands.                WILL NOT FIT THE 2015-2023 GT350 MUSTANG or 2020+ GT500! Features: - 25 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM ...

More details ➞

           VMS Racing SINGLE BEADLOCK Drag Race V-Star wheel in 17x10" 5X120 (5x4 3/4) with 44 offset  (7 1/4" backspacing) is currently available only in black milling. This wheel fits great on the GEN 5/6 Camaro and the 2008-2009 Pontiac G8 GT, 2014-2017 Chevy SS, and the 2008-2014 Cadillac CTS-V. We also have a 18x5 front wheel specifically made for the GEN 5 and 6 Camaro that will also fit the 2008-2009 Pontiac G8 GT, 2014-2017 Chevy SS and the 2008-2014 Cadillac CTS-V.                                                    FITMENT: We have verified the fit of this wheel on: - Gen 5 and 6 Camaro SS (including 1LE) and V6. ALL 2010 Camaro may need a thin wheel spacer. - Gen 5 Camaro ZL1. May need thin wheel spacer. - 2008-2009 Pontiac G8 GT (fit NOT VERIFIED on the GXP with the Brembo brakes) - 2014-2017 Chevy SS (fit was verified on car with the Brembo brakes). - 2008-2014 Cadillac CTS-V. - 2006-2013 Corvette Z06 and Grand Sport. Will fit base Corvette, but offset is incorrect and wheels will stick out of the fenders close to an inch.           Will not fit the Gen 6 ZL1. We have not verified the fit on Z28 cars, they may fit, but we have not yet had access to one of these vehicles to verify the fit.       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands.              Features: - 25 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM ...

More details ➞

            VMS Racing SINGLE BEADLOCK Drag Race V-Star 17x10" 5x115 with 30 offset wheel is currently available ONLY in black milling.            This wheel was designed specifically for the Hellcat NARROW body cars. You can use this wheel on a wide body car, but the wheel will be 1 inch inboard of the fender flare. YOU WILL NEED SHORTHER SWAY BAR LINKS TO MOUNT THESE 17X10 WHEELS.                 OUR ADJUSTABLE SWAY BAR END LINK ARE HERE (CLICK HERE)            VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands.                      Features: - 25 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM ...

More details ➞

          VMS Racing Street/Drag Race 2 front and 2 rear Modulo 17x10 (54 offset) & 18x5" 5X114.3 (-12 offset) wheels are currently only available in black milling. Front 18x5 wheel information:          This wheel was designed specifically for the S550 Mustangs to clear front brakes including the GT with the performance package Brembo brakes (will not fit the GT350). This wheel will fit the S197 Mustangs but ONLY with the standard GT brakes, it will not fit with either the 4 or 6 piston Brembo brake packages. Rear 17x10 wheel information:       This wheel will fit both the S197 and S550 Mustangs EXCEPT the GT350 with no issues.       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands.                      WILL NOT FIT THE 2015-2022 GT350 MUSTANG! Features 17x10 wheels: - 22 pounds each. - Cast aluminum. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JWL approved. Features 18x5 wheels: - 20 pounds each. - Cast aluminum. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JWL approved....

More details ➞

          VMS Racing Street/Drag Race 2 front and 2 rear Black Hawk 17x10 (54 offset) & 18x5" 5X114.3 (-12 offset) wheels are currently only available in black milling. Front 18x5 wheel information:          This wheel was designed specifically for the S550 Mustangs to clear front brakes including the GT with the performance package Brembo brakes (will not fit the GT350). This wheel will fit the S197 Mustangs but ONLY with the standard GT brakes, it will not fit with either the 4 or 6 piston Brembo brake packages. Rear 17x10 wheel information:       This wheel will fit both the S197 and S550 Mustangs EXCEPT the GT350 with no issues.       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands.                      WILL NOT FIT THE 2015-2022 GT350 MUSTANG! Features: - 18x5: 20 pounds each. - 17x10: 22 pounds each. - Cast aluminum. - Complete set of four wheels. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved....

More details ➞

     VMS Racing Street/Drag Race Black Hawk wheel in 17x10" 5X120 with 44 offset (7 1/4" backspacing) and the 18x5 -25 offset wheel is currently only available in black milling. These wheels fit great on the GEN 5 and 6 Camaro, the 2008-2009 Pontiac G8 GT, the 2014-2017 Chevy SS, and 2008-2014 Cadillac CTS-V. The 18x5 front wheels fit great on the GEN 5 and 6 Camaro, the 2008-2009 Pontiac G8 GT, the 2014-2017 Chevy SS, and 2008-2014 Cadillac CTS-V.                                        FITMENT 17x10 REAR WHEEL:      We have verified the fit of this wheel on the Gen 5 and 6 Camaro SS (including 1LE) and V6 (2010 Camaro may need a thin wheel spacer), the Gen 5 Camaro ZL1 (may need a thin wheel spacer), the 2008-2009 Pontiac G8 GT (Fit NOT verified on the GXP model with Brembo brakes), the 2014-2019 Chevy SS (fit was verified on car with the Brembo brakes), the 2008-2014 Cadillac CTS-V, and the 2006-2013 Corvette Z06 and Grand Sport. We have not verified the fit on the Gen 6 ZL1, or Z28 cars, they may fit them, but we have not yet had access to these vehicles to verify the fit.                                                                                      FITMENT 18x5 FRONT RUNNERS:      This wheel will fit the Gen 5 and Gen 6 Camaro SS ( including the 1LE), the Camaro V6, the Gen 5 and 6 Camaro ZL1, the 2008-2009 Pontiac G8 GT (fit NOT verified on the GXP model with the Brembo brakes), the 2014-2017 Chevy SS (fit was verified on a car with the Brembo brakes), the 2008-2014 Cadillac CTS-V, and the 2006-2013 Corvette Z06 and Grand Sport (will not fit ZR1). We have NOT verified the fit of this wheel on the Gen 5 Camaro ZL1, or the Z28. This wheel may or may not fit the above mentioned models. As we get more cars here to check fitment we will update this information.      VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands.              Features 17x10 wheels: - 22 pounds each. - Cast aluminum. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved. Features 18x5 wheels: - 20 pounds each. - Cast aluminum. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved....

More details ➞

          VMS Racing Street/Drag Race Drag Pack wheel set. There are 2 front and 2 rear V-Star 17x11 (+2 offset/ 6.1" backspacing) & 18x5" 5X115 (-30 offset) wheels which are currently available in black milling, or black milling with polished lip. Front 18x5 wheel information:          This wheel was designed specifically for the Hellcat narrow body cars to clear the OEM 6 piston Brembo front brakes. Will work on any 2006-2020 Charger or Challenger including the widebody cars, WILL NOT FIT 2021-2023 HELLCATS WHICH HAVE BIGGER BRAKES. Rear 17x11 wheel information:         This wheel was designed specifically for the Hellcat WIDEBODY body cars. Will work on any Charger or Challenger including the narrow body cars. YOU WILL NEED SHORTHER SWAY BAR LINKS TO MOUNT THESE 17X11 WHEELS. On narrow body cars the offset is not correct and the wheel will be 1" outboard.             OUR ADJUSTABLE SWAY BAR END LINK ARE HERE (CLICK HERE)       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands.                      Features: - 18x5: 20 pounds each. - 17x11: 22 pounds 8 ounces each. - Cast aluminum. - Complete set of four wheels. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved....

More details ➞

       VMS Racing Patented Billet Aluminum AR15 Bullet Antenna™ kit with EXCLUSIVE Patented Anti-Theft Device and Antenna Booster Coil. There is a Patent Pending on the design of the AR15 Bullet Antenna™ itself. Available in 5 different colors.                                   COOLEST LOOKING BULLET ANTENNA EVER!       This design was inspired by Americas most popular sporting rifle, the AR15, and its military cousin the select fire M4/M16. The AR series of rifles have defended the homes,  property, and freedoms of Americans for over 50 years, and its cousin the M4/M16 rifles have fought for Americas freedom all over the world.          SHOW YOUR SUPPORT FOR THE 2ND AMMENDMENT AND OUR TROOPS!       This antenna will install just like any other 50 caliber antenna, with the additional step of first removing the AR15 rifle, and installing the AR15 rifle after you mount the lower bullet antenna casing. You first need to remove the bullet antenna tip from the bullet antenna with the included spanner wrench. After you remove the bullet antenna tip, the AR15 rifle and its mount can be simply pulled off the stud that holds it and the antenna tip. You then remove your factory OEM antenna and simply install the lower bullet antenna casing by using the correct included antenna adapter and screwing it in. After the bullet antenna casing is screwed in, you put the AR15 rifle back onto the lower bullet antenna casing stud and then put the bullet antenna tip back on and tighten it.        The 50 caliber bullet part of the AR15 Bullet Antenna™ is manufactured completely from T6061 Billet Aluminum and hard anodized for a long lasting finish. Unlike many competitors antennas, the VMS Racing Bullet Antennas are made out of 100% CNC Machined billet aluminum. The miniature AR15 rifle is die cast out of aluminum, and then it is hard anodized in a matte black finish, just like a real upper and lower AR15 rifle would be finished.  The anodizing will prevent the antenna and rifle from fading with time. Easy installation, install in minutes with the included special Anti-Theft tool.         Each antenna comes with a variety of adapters and studs to fit most vehicles with screw in style antennas. WILL NOT FIT vehicle equipped with power antennas. Anti-Theft and Antenna Reception Booster Coil:           These antennas come with a Patent Pending Anti-Theft device and a reception booster coil (look at diagram on photos). They come with a wrench to tighten the antenna, once tightened with the spanner wrench you can not remove it by hand. If someone wants to steal it they will need to use pliers and damage it. For additional security you can add some thread locking fluid, and since you have an actual wrench you will be able to remove the antenna even with a thread locker, something that can not be done with competitors products that come with thread locking fluid, which once installed can not be removed without damaging them with some pliers. The reception booster coil will help if you are in rural areas, it will not improve the reception to the OEM spec of the factory antenna, but it will get you close.  Radio Reception Info :           Like with most aluminum short replacement antennas, you might loose some radio reception, yes even with the patent pending booster coil, this varies by vehicle and depends on the area that you live. If you live in a rural area, the reception might not be good. These antennas are made of aluminum, and unlike the OEM antennas these are not amplified. Although many customers have told us that they never had any reception issues with these we wanted to state this info for reference. Features: • Total Length: 7 1/2 inches (19cm) from bullet bottom to the top of AR15 rifle. • AR15 rifle Length: 7 inches (18cm). • Bullet thickness: 15/16 inches (.940) at widest point (24mm). • Patented Anti-Theft device. • Patented Antenna Booster Coil. • Patented AR15 antenna design.• Bullet is CNC machined from T6061 billet aluminum. • Rifle is die cast from aluminum.• Available in 5 different color combinations.• Beautiful hard anodized finish.• Easy to install.• Looks great!  PATENT NUMBERS: D896,787,  D951,924 , and 10,784,560 ...

More details ➞

VMS Racing Red 14" 2 Piece Slotted Rotor Front Big Brake Kit for 2015-2021 V6, EcoBoost, and GT Mustangs. Are you looking for a racing-style track ready braking system, with a light weight 2 piece rotor, with unmatched stopping power for your 2015-2021 V6/ EcoBoost/ GT Mustang that is truly affordable? There is no need to look any further as VMS Racing has come out with an all-new Red 14" Slotted 2 Piece Rotor Front Big Brake Kit. Every kit comes with high temperature, high friction race compound pads, and premium grade fasteners. Features and Benefits: - Provides Better Braking Capability - Red Powder Coated 4-Piston Front Calipers - Race Style Brake Kit - Track ready - 14” 2 Piece Light Weight Slotted Rotor with Aluminum Hat - Aluminum Rotor Hat - Can save up to 6 pounds over your stock rotor - Bolt-on-installation Rotors mount to the hubs with forged aluminum hats, and radial mount brackets secure the caliper to the spindle in the OE location without modification. Reuses your stock brake lines.  Specifications: - Spindle Type: Factory Disc Spindles - Mount Type: Radial - Caliper Type: 4-Piston Red Powder Coated Calipers  - Rotor Diameter: 14” - Min Wheel Diameter Required: 18” Vehicle Fitment: -2015-2021 V6/ EcoBoost/ GT Mustangs Please Note: We recommend using an 18" or larger wheels with this 14" front brake kit to ensure proper clearance...

More details ➞

              Modulo machined billet aluminum shift knobs, are the latest shift knobs from VMS Racing. Combining the modern machined billet aluminum look with the popular matte anodized finish, and a universal DIRECT SCREW IN FIT.             These shift knobs are manufactured of Aircraft Quality T-6061 Billet Aluminum, and then they are precision machined to exacting tolerances. After all the machining is done, the shift knob is matte anodized and then final machined for the incredible two tone machined look that these shift knobs have. Look at the photos, the finish looks amazing!            Each shift knob includes 6 screw in adapter for use on almost any vehicle with a manual transmission, or an automatic transmission that uses the popular 8x1.25MM Thread.             Available in 3 different styles, the short, the long, and the round Teardrop version.            The long and short versions come with shift 4 different shift patterns that will match most manual transmission vehicles, look at the photos.           When installing the shift knob you just find the correct adapter for you shifter, you screw correct adapter into the shift knob and then simply screw in the shift knob to your shifter. There is no need for a locking nut, as the last thing you will do is to put the shift pattern emblem on the knob after it it completely tightened down, so your shift pattern will always end up straight.                                 Shifter thread size chart, click here FEATURES: • CNC Machined from T6061 billet aluminum, then beautifully anodized, then final machined and clear coated.• Direct bolt-on with no modifications required.• 6 adapters included. • 4 different shift pattern emblems, for 5 and 6 speed vehicles, for the long and short versions are included.• Look at the photos, finest quality shift knob available.• Easy to install. ADAPTERS INCLUDED: • 10X1.5 MM • 10X1.25 MM • 12X1.25 MM • 16X1.5 MM • 8X1.25 MM • 12X1.75 MM SPECIFICATIONS MODULO SHORT: • Length: 3 inches. • Diameter: 1.5 inches. • Weight: 6 ounces SPECIFICATIONS MODULO LONG: • Length: 5 inches. • Diameter: 1.5 inches. • Weight: 9 ounces SPECIFICATIONS MODULO TEARDROP: • Length: 3.5 inches. • Diameter: 2 inches. • Weight: 8 ounces...

More details ➞

          VMS Racing Street/Drag Race V-Star Street Drag Race four wheel package for the 1997-2004 C5 Corvette with two rear 18x10.5" 5x120 (5X4.75) with 52 offset (7.75" backspace), and two front 18x9.5" 5x120 (5X4.75) with 40 offset (6.75 backspace) wheel as seen in S3 Magazine.            VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands.                           Additional VMS Racing parts used to complete this build: 1- Lowering kit (click here)   2- Stainless Steel racing lug nuts (click here)   3- Centering rings (click here) Choose 70.3 to 73.1   Rear 18x10.5" wheels: - 25 pounds each. - Tire size used: 295-40/18 - Cast aluminum. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved. Front 18x9.5" wheels: - 24 pounds each. - Tire size used: 255-35/18 - Cast aluminum. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved....

More details ➞

          So, you can't install your rear 17" drag racing wheels and tires on your Dodge Challenger/Charger, or your Chrysler 300 as they hit the rear sway bar? Or, you want to eliminate the flex of the factory links and soft rubber bushings that flex under load, or maybe you just want to be able to adjust the length of your sway bar links to fine tune your rear bar, or maybe just get some preload on the rear bar? No problem, VMS Racing comes back to the rescue to save the day with the best adjustable sway bar end links for Dodge Challenger/Charger/Chrysler 300 on the market!          The VMS Racing adjustable end links come with the very best 1/2 inch chrome moly Teflon lined self sealing spherical rod ends mounted on the highest quality black anodized for durability and good looks 7075 Billet Aluminum Sway Bar End Links. The adjustable links will eliminate the flex of the factory links and rubber bushings that flex under load. Easy to adjust on the car as our adjustable links are threaded on one side with right hand threads and on the other with left hand threads. Unlike some of our competitors end links, our do not need to be removed to adjust them, as they have left and right hand threads. This allows for easy on the car sway bar link adjustments to fine tune your rear sway bars.         These sway bar end links are the obvious choice when you want to install 17" drag racing wheels on your Challenger/Charger/Chrysler300, or you simply want to tighten up the handling after installing lowering springs by allowing you to adjust the height of your sway barsFeatures: • 7075 CNC Machined Billet Adjustable Rear Sway Bar Links. • Rod end center to center adjustable from: 11.5" open to 9.50" closed. • On the car adjustable sway bar end links. • Chrome moly 1/2" Teflon lined self sealing rod ends. • Solid Stainless steel bushings. • Steel YFS 12.9 grade installation bolts. • Allows you to install 17" drag racing wheels. • Allows for preloading of sway bars to fine-tune your specific suspension setup. • Reduces sway bar end link deflection. • Allows for proper sway bar working angles and geometry on lowered cars.• Beautiful hard anodized finish for durability and good looks.• Easy to install.• Looks great! ...

More details ➞

           The T-Shirt is a soft, medium-weight shirt made with 100% ring-spun cotton. The short-sleeve shirt features the VMS Racing logo graphic on the front-top chest, an assortment of VMS Racing wheels graphics and logo in the middle of the back, and the USA flag on the left sleeve. This is a unisex, regular fit t-shirt. Only available in black.             The Hoodie is a soft, heavy-weight hoodie made with 50% cotton and 50% polyester. The long-sleeve hoodie features the VMS Racing logo graphic on the front-top chest, an assortment of VMS Racing wheels graphics and logo in the middle of the back, and the USA flag on the left sleeve. This is a unisex, regular fit hoodie. Only available in black. Available in these sizes: Small Medium Large XL XXL XXXL...

More details ➞

           The T-Shirt is a soft, medium-weight shirt made with 100% ring-spun cotton. The short-sleeve shirt features the True Spike lug nut logo graphic on the left-front-top chest, and True Spike bomber style goddess of war nose art logo in the middle of the back, and the USA flag on the left sleeve. This is a unisex, regular fit t-shirt. Only available in black.             The Hoodie is a soft, heavy-weight hoodie made with 50% cotton and 50% polyester. The long-sleeve hoodie features the True Spike lug nut logo graphic on the left-front-top chest, and the True Spike bomber style goddess of war nose art logo in the middle of the back, and the USA flag on the left sleeve. This is a unisex, regular fit hoodie. Only available in black. Available in these sizes: Small Medium Large XL XXL XXXL...

More details ➞

      VMS Racing Modulo Street/Drag Race Drag Pack for the 1979-1993 Fox Body Mustangs with the OEM 4 lug 4x108 bolt pattern. You get two 15x10" 4x108 +20MM offset (6.3" of backspacing) wheels, and two 15x3.5" 4x108 -13 offset (1.75" backspacing) wheels. These wheels are currently only available in black milling.        VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands. Fitment: - 1979-1993 Fox Body Mustangs with the OEM 4x108 bolt pattern. Rear wheels:          15x10" with 6.3" backspacing. Minor mods may be necessary, such as removing the quad shocks. This wheel was made with a 6.3" BS as opposed to the common 6.5" BS to help the Fox Body guys. Usually a 6.5" wheel with a 275-50/R15 tire will touch the inner wheel wells which will need to be pounded in. Most people will put a 1/4" spacer so the tire does not hit the fender. We basically changed the BS so you do not need to use a spacer, you may still need to do very minimal pounding on the wheel well depending on the specific tire. Smaller tires than a 275 make fitting much easier.            This 15x10 rear wheels may not fit on cars cars with disc brakes. Check for brake clearance by measuring from the center of the axle to the top of the caliper. This measurement cannot exceed 6-1/2"  [6.52"] or the caliper will come in contact with the drop center of the wheel. Front Wheels:       15x3.5" with 1.75" backspacing. This wheel has a special center cap, that is wider and longer than our regular center caps. This center cap will clear the OEM spindle and rotor on the Fox Body Mustangs. This wheel was specially made for the Fox Body Mustangs.   Rear Wheel Features: - 18.5 pounds each. - Cast aluminum. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved.  Front Wheel Features: - 11 pounds each. - Cast aluminum. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1 MM - Street legal: VIA and JLL approved....

More details ➞

      VMS Racing Modulo dual bolt pattern 4x108 and 4x114.3 15x3.5" with -13 offset (1.75" backspacing) wheel is currently only available in black milling.        VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands. Fitment: - 1979-1993 Fox Body Mustangs. This wheel has a special center cap, that is wider and longer, that will clear the OEM spindle and rotor on the Fox Body Mustangs. This wheel was specially made for the Fox Body Mustangs.  - Other vehicles that use a 4x108 or 4x114.3 bolt pattern.    Features: - 11 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1 MM - Street legal: VIA and JLL approved....

More details ➞

      VMS Racing Modulo 5x120.7 (5x4.75") 15x3.5" with -13 offset (1.75" backspacing) wheel is currently only available in black milling.        VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands. Fitment: - GM Muscle Car era cars with 5x4.75" bolt pattern. Chevrolet Chevelle, Camaro, Nova, Impala etc.. Pontiac GTO, Firebird, Trans Am, Tempest, Ventura, LeMans etc... Oldsmobile Cutlass, 442, Omega etc... Buick GS, Regal, Riviera, Skylark etc... Will fit some modern GM cars, like the 3rd Gen Camaro/Firebirds, and the G body cars from the 80's, but a lot of the late model cars have front rotors and calipers that are way too big for a 15" wheel.  Features: - 11 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1 MM - Street legal: VIA and JLL approved....

More details ➞

      VMS Racing Modulo 5x114.3 (5x4.5") 15x3.5" with -13 offset (1.75" backspacing) wheel is currently only available in black milling.        VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands. Fitment: - Ford/Mercury Muscle Car era cars with 5x4.5" bolt pattern. Mustang, Fairlane, Torino, Cougar etc... Will fit some modern Fords, like most Fox Body Mustangs with 5 lug conversions, but a lot of the late model cars have front rotors and calipers that are way too big for a 15" wheel. - Dodge/Plymouth Muscle Car era cars with 5x4.5" bolt pattern. Roadrunner, GTX, Charger, Challenger, Barracuda, Cuda, Satellite, Belvedere etc...    Features: - 11 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1 MM - Street legal: VIA and JLL approved....

More details ➞

      VMS Racing Modulo dual 4 lug bolt pattern 4x100 and 4x108 15x10" 20mm offset (6.3" of backspacing) wheel is currently only available in black milling.        VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands.        These wheels may not fit on cars cars with disc brakes. Check for brake clearance by measuring from the center of the axle to the top of the caliper. This measurement cannot exceed 6-1/2"  [6.52"] or the caliper will come in contact with the drop center of the wheel. Fitment: - 1979-1993 Fox Body Mustang 15x10 with 6.3" backspacing. Minor mods may be necessary, such as removing the quad shocks. This wheel was made with a 6.3" BS as opposed to a 6.5" BS to help the Fox Body guys. Usually a 6.5" wheel with a 275-50/R15 tire will touch the inner wheel wells which will need to be pounded in. Most people will put a 1/4" spacer so the tire does not hit the fender. We basically changed the BS so you do not need to use a spacer, you may still need to do very minimal pounding on the wheel well depending on the specific tire. Smaller tires than a 275 make fitting much easier.   Features: - 18.5 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved....

More details ➞

      VMS Racing Modulo 5x114.3 (5x4.5") 15x10" wheel is currently only available in black milling. You can get either a 20mm offset (6.3" of backspacing) or a 50mm offset (7.5" backspacing).       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands.         These wheels may not fit on cars cars with disc brakes. Check for brake clearance by measuring from the center of the axle to the top of the caliper. This measurement cannot exceed 6-1/2"  [6.52"] or the caliper will come in contact with the drop center of the wheel. Fitment: - 1996-2004 Ford Mustang with live axle will use 15x10 with 7.5" backspacing. Everything should clear. - 1979-1993 Fox Body Mustang with 5 lug conversion will use 15x10 with 6.3" backspacing. Minor mods may be necessary, such as removing the quad shocks. This wheel was made with a 6.3" BS as opposed to a 6.5" BS to help the Fox Body guys. Usually a 6.5" wheel with a 275-50/R15 tire will touch the inner wheel wells which will need to be pounded in. Most people will put a 1/4" spacer so the tire does not hit the fender. We basically changed the BS so you do not need to use a spacer, you may still need to do very minimal pounding on the wheel well depending on the specific tire. Smaller tires than a 275 make fitting much easier.   Features: - 18.5 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved....

More details ➞

      VMS Racing Modulo 5x120.7 (5x4.75") 15x10" wheel is currently only available in black milling. You can get either a 25mm offset (6.5" of backspacing) or a 50mm offset (7.5" backspacing).       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands.        These wheels may not fit on cars cars with disc brakes. Check for brake clearance by measuring from the center of the axle to the top of the caliper. This measurement cannot exceed 6-1/2"  [6.52"] or the caliper will come in contact with the drop center of the wheel. Fitment: - 2004-2006 Pontiac GTO will use 15x10 with 7.5" backspacing. Minor mods may be necessary. Features: - 18.5 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1 MM - Street legal: VIA and JLL approved....

More details ➞

      VMS Racing Modulo 5x115 15x10" with 30 offset (6.7" backspacing) wheel is currently only available in black milling.        VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands.       These wheels may not fit on cars cars with disc brakes. Check for brake clearance by measuring from the center of the axle to the top of the caliper. This measurement cannot exceed 6-1/2"  [6.52"] or the caliper will come in contact with the drop center of the wheel. Fitment: - 2009-2022 Dodge Challenger and Charger with rear brake conversion to use a 15" wheel. In no way, shape, or form, will a 15" wheel fit on a modern Charger/Challenger without a rear brake conversion. They will not clear the calipers.   Features: - 18.5 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1 MM - Street legal: VIA and JLL approved....

More details ➞

Shopping for someone else but not sure what to give them?Give them the gift of choice with a VMS Racing/True Spike E-Gift Card. Available in amounts from $10 to $500. E-Gift Cards are delivered by email and contain instructions to redeem them at checkout. Our gift cards have no additional processing fees. E-Gift Cards are not available for purchase with Sezzle. If you’d like to purchase other items with Sezzle, please make a separate purchase for E-Gift card(s)....

More details ➞

      VMS Racing Drag Race V-Star 15X3.5" 5 lug 5x120.7 (5x4.75") wheel is currently only available in black milling. Can be used on certain vehicles as a rear drag wheel. Special non-tapering 73.1mm center bore, and a special center cap to clear the brake rotors on 60's, 70's, 80's and some 90's and early 2000 cars. These will fit cars that have spindle mounted brake rotors, where you need a big center cap to cover the brake spindle and nut.      VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands. Features: - 11 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal, VIA and JLL approved....

More details ➞

      VMS Racing Drag Race V-Star 15X3.5" 5 lug 5x114.3 (5x4.5") wheel is currently only available in black milling. Can be used on certain vehicles as a rear drag wheel. Special non-tapering 73.1mm center bore, and a special center cap to clear the brake rotors on 60's-70's muscle cars, and modern cars.       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands. Features: - 11 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal, VIA and JLL approved....

More details ➞

      VMS Racing Drag Race V-Star 15X3.5" 4 lug wheel is currently only available in black milling. Can be used on certain vehicles as a rear drag wheel too. This wheel was specifically designed for the 1979-1993 Fox Body Mustangs. It has a non-tapering 73.1mm center bore, and a special center cap to clear the brake rotor on those cars.       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands. Features: - 11 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal, VIA and JLL approved....

More details ➞

                  The VMS Racing hub centric rings are CNC Machined from billet aluminum and are designed to fill the gap between the hub of your car and the center bore of the wheel. This ensures that the rim is sitting 100% centered on the hub and eliminates any potential vibrations. These are anodized in black.            SOLD IN PAIRS (2). IF YOU NEED TO DO 4 WHEELS YOU NEED TO ORDER 2                   Most modern wheels are hub centric as opposed to the older steel wheels which were lug centric. Most all aftermarket wheels, including the VMS Racing wheels, are lug centric. This is because aftermarket manufacturers make wheels to fit a wide variety of cars, and to do that they need to have a big hub diameter to insure that they will fit lots of different vehicles. An OEM manufacturer makes a wheel to fit a specific vehicle, and thus the hub size fits the axles perfectly.               To insure that your wheels are properly centered on the hub of your vehicle, we recommend that you use our hub centric rings. These will eliminate any potential vibrations. The hub centric rings are not needed in most installations, but they assure you, that when you install your wheels, they are perfectly centered.                          ALL VMS Racing wheels have a hub size of 73.1mm. These are the sizes we offer: -73.1mm to 54.1mm - 73.1mm to 56.1mm -73.1mm to 57.1mm  -73.1mm to 60.1mm  -73.1mm to 63.4mm -73.1mm to 64.1mm -73.1mm to 66.1mm -73.1mm to 66.9mm -73.1mm to 67.1mm -73.1mm to 70.3mm -73.1mm to 70.5mm  PDF Hub Centric Guide...

More details ➞

      VMS Racing Drag Race V-Star 15x8" wheel is currently only available in black milling.       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands. Features: - 14 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved....

More details ➞

      VMS Racing TYPHOON Drag Race 15x3.5" dual pattern 5 lug 5x100 and 5x114.3 wheel with 10 offset is currently only available in black milling.       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands. Features: - 12 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved....

More details ➞

      VMS Racing TYPHOON Drag Race 15x3.5" dual pattern 4 lug 4x100 and 4x114.3 wheel with 10 offset is currently only available in black milling.       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands. Features: - 12 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved....

More details ➞

      VMS Racing DELTA Drag Race 15x3.5" dual pattern 5 lug 5x100 and 5x114.3 wheel with 10 offset is currently only available in black milling.       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands. Features: - 12 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved....

More details ➞

      VMS Racing DELTA Drag Race 15x3.5" dual pattern 4 lug 4x100 and 4x114.3 wheel with 10 offset is currently only available in black milling.       VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands. Features: - 12 pounds each. - Cast aluminum. - Sold each. - This is a milled wheel, this is not a painted wheel. - Center bore: 73.1MM - Street legal: VIA and JLL approved....

More details ➞

        Black VMS Racing PATENTED Billet Aluminum 50 Caliber Bullet Style Short Replacement Antenna.         NEW! BACK THE BLUE BULLET ANTENNA, SHOW YOUR SUPPORT FOR THE BRAVE MEN AND WOMEN OF LAW ENFORCEMENT WHO RISK THEIR LIVES TO PROTECT AND SERVE!         The VMS Racing 50 Caliber Antenna is manufactured completely from T6061 Billet Aluminum and hard anodized for a long lasting finish. Unlike many competitors antennas, the VMS Racing Antennas are made out of 100% CNC Machined billet aluminum, they and not made from a cheap cast aluminum mold, they will not break or chip. The hard anodized finish will prevent the antenna from fading with time. Easy installation, install in minutes without special tools.         Each antenna comes with a variety of adapters and studs to fit most vehicles with screw in style antennas. WILL NOT FIT vehicle equipped with power antennas.Radio Reception Info :          Like with most aluminum short replacement antennas, you might loose some radio reception. this varies by vehicle and depends on the area that you live. If you live in a rural area, the reception might not be good. These antennas are made of aluminum, and unlike the oem antennas these are not amplified. Although many customers have told us that they never had any reception issues with these we wanted to state this info for reference. Features:• CNC machined from T6061 billet aluminum.• Beautiful hard anodized finish.• Easy to install.• Looks great!                      THE ORIGINAL BULLET ANTENNA SINCE 2010                            BULLET ANTENNA = VMS RACING                      PATENT NUMBERS 10,784,560 & 10,819,003 ...

More details ➞

VMS Racing Pro Series CNC MACHINED billet aluminum fuel rail for the Honda H22, H23, and F22  engines. VMS Racing high volume fuel rails are CNC-machined from T6061 billet aluminum. The fuel rails feature a 1/2" inch fuel bore that is capable of flowing enough fuel to easily support 1,000+ Horsepower. This large bore also dampens back pressure pulses created by larger injectors and will work perfectly with stock injector sizes. Easy to drill.  The VMS Racing fuel rail comes with fittings to retain stock fuel lines. Available in red, blue, black and gun metal. Features:• No additional parts required for installation, installs with factory fuel line using supplied fittings. • Internally they are a full 1/2” ID through the bore, easily capable of supporting over 1,000 HP.• Will work with OEM fuel lines or custom fuel lines.• -6AN or 9/16-18 ports. 4 total -6an ports.• 1/8 NPT port for nitrous or fuel pressure gauge• Features full sized ports on each end for optimal injector supply and minimal hydraulic fluctuation.• All necessary hardware, fittings, and O-rings are included.• Billet aluminum, CNC Machined construction for unsurpassed fit and finish.• Type II bright dip anodized finish for great looks and corrosion protection. Fits the following vehicles: - 1990-1993 Accord DX 2.2L/2156cc F22A1 - 1990-1991 Accord EX 2.2L/2156cc F22A1 - 1990-1991 Accord EX2.2L/2156cc F22A4 - 1991-1993Accord EX 2.2L/2156cc F22A6 - 1990-1993 Accord LX 2.2L/2156cc F22A1 - 1991 Accord SE 2.2L/2156cc  F22A6 - 1993 Accord SE2.2L/2156cc F22A6 - 1993 Accord 10th Anniversary 2.2L/2156cc F22A1 - 1997-2001 Prelude Type SH 2.2L/2156cc H22A4 - 1997-2001 Prelude 2.2L/2156cc H22A4 - 1992-1996 Prelude S 2.2L/2156cc H22A1 - 1995 Prelude SE 2.3L/2259cc H23A1 - 1992-1996 Prelude Si2.3L/2259cc H23A1 - 1992 Prelude Si 4WS 2.3L/2259cc H23A1 -1993-1996 Prelude VTEC 2.2L/2156cc H22A1  ...

More details ➞