DRAG PACK STREET OR DRAG RACE 4 LUG 10 HOLE PHONE DIAL WHEELS 15x10 4X108 20 OFFSET (6.3" BACKSPACING) & 15x3.5 4x108 -13 OFFSET (1.75" BACKSPACING) for 1979-1993 FORD MUSTANG GT LX SVO FOX BODY BLACK or SILVER

$ 789.95


      VMS Racing Phone Dial Street/Drag Race Drag Pack for the 1979-1993 Fox Body Mustangs with the OEM 4 lug 4x108 bolt pattern. You get two 15x10" 4x108 +20MM offset (6.3" of backspacing) wheels, and two 15x3.5" 4x108 -13 offset (1.75" backspacing) wheels. These wheels are available in black or silver milling. 

    These wheels are for use with the stock Ford center caps that came on the OEM 10 hole 15" Mustang wheels that were made between 1985-1989. They do come with small center caps for you to be able to use them while you get the OEM Ford Center caps.

      VMS Racing Wheels are used by both professionals and the street crowd because of their superb quality and craftsmanship, long recognized by enthusiasts for their great value and styling. VMS Racing wheels are one of today's most popular brands.

Fitment:

- 1979-1993 Fox Body Mustangs with the OEM 4x108 bolt pattern.

Rear wheels:

         15x10" with 6.3" backspacing. Minor mods may be necessary, such as removing the quad shocks. This wheel was made with a 6.3" BS as opposed to the common 6.5" BS to help the Fox Body guys. Usually a 6.5" wheel with a 275-50/R15 tire will touch the inner wheel wells which will need to be pounded in. Most people will put a 1/4" spacer so the tire does not hit the fender. We basically changed the BS so you do not need to use a spacer, you may still need to do very minimal pounding on the wheel well depending on the specific tire. Smaller tires than a 275 make fitting much easier. 

          This 15x10 rear wheels may not fit on some cars with rear disc brakes. Check for brake clearance by measuring from the center of the axle to the top of the caliper. This measurement cannot exceed 6-1/2"  [6.52"] or the caliper will come in contact with the drop center of the wheel.

Front Wheels:

      15x3.5" with 1.75" backspacing. This wheel has a special center cap, that is wider and longer than our regular center caps. This center cap will clear the OEM spindle and rotor on the Fox Body Mustangs. This wheel was specially made for the Fox Body Mustangs. 

 Rear Wheel Features:

- 18 pounds each.

- Cast aluminum.

- This is a milled wheel, this is not a painted wheel.

Center bore: 73.1MM

- Street legal: VIA and JLL approved.

 Front Wheel Features:

- 12 pounds each.

- Cast aluminum.

- This is a milled wheel, this is not a painted wheel.

Center bore: 73.1 MM

- Street legal: VIA and JLL approved.